RD-7503(A)2008.11.41:45PM페이지61

SETTING THE MULTI ROOM SETUP

The ROOM 2 function allows enjoying one source in the main room while playing another in a different room at the same time.

• ROOM 2 : To turn on or off the ROOM 2 function.

• INPUT : To select the desired ROOM 2 source.

• VOLUME : To adjust the volume on the power amplifier assigned

to "BACK ← → ROOM 2" or "ROOM 2".

Notes:

The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.

Only the (composite) video signals can be output to the different

room.

ENGLISH

1. Press the CURSOR UP()/DOWN() buttons to select the desired item.

Note:

The VOLUME setting is invalid when the AMP ASSIGN is assigned to "BI-AMP" or "SURR BACK".

(For details, refer to "When selecting the AMP ASSIGN" on page 41.)

2. Press the CURSOR LEFT()/RIGHT() buttons to set the selected item as desired.

When selecting the ROOM 2

OFF : To turn off the ROOM 2 function.

ON : To turn it on. Notes:

When the ROOM 2 is set to OFF, the INPUT and the VOLUME cannot be selected.

When you do not use the ROOM 2 function, set the ROOM 2 to OFF to save electricity.

When selecting the INPUT

You can select the desired among MAIN source, TUNER, CD, F.AUX, TAPE, BT, VIDEO 1 ~ VIDEO 3 as a ROOM 2 source.

Note:

When the EXTERNAL IN is selected as a main input, if the MAIN source is selected as a ROOM 2 input, no audio signal can be heard in the different room (ROOM 2).

When selecting the VOLUME

You can adjust the volume on the power amplifier assigned to "BACK ← → ROOM 2" or "ROOM 2" when the ROOM 2 speaker terminals are connected to the speakers in a different room.(For details, refer to "When selecting the AMP ASSIGN" on page 41.)

61

Page 61
Image 61
Sherwood RD-7503 manual Setting the Multi Room Setup, When selecting the Room, When selecting the Input