How to connect the AV OUT Terminals

You can connect a VCR to the AV OUT terminal to record the program you are viewing on-screen. An external monitor can also be connected to the AV OUT terminals. Connect the VCR as shown below.

Recording Equipment (S-VHS /VHS VCR)

VIDEO

AUDIO

Notes:

This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR. Due to license restrictions, if a device (STB, DVD, etc.) is connected to the HDMI input of the unit, no video or audio output is allowed.

AV Out signal is available when receiving digital channel. However, all formats will be down converted to NTSC.

Never connect the VIDEO IN and OUT terminals to the same video recorder, as this could cause incorrect operation.

Even if unit is in Split mode, OUT terminals only output the main picture and sound signals. A sub-picture, etc., will not be output.

AV terminals will not output Y, PB, PR, PC/HDMI IN or SD card signals.

Certain program content output from the AV Out connector may have the Macrovision signal modification applied to its signal, preventing VCRs from recording this video signal.

Getting Started

17

Page 17
Image 17
Panasonic PT 61DLX75 manual How to connect the AV OUT Terminals