Panasonic PT 61DLX75 Using the CH/VOL Button, Channel and Program Tuning, Unit Status display

Using the CH/VOL Button

Select desired channel:

Press CH <>or NUMBER keys.

Adjust to desired volume level:

Press VOL + or VOL -.

Notes:

•The channel number and volume level are stored even after the unit is turned off.

•Power consumption can be reduced if the volume level is lowered.

3	1	2	3
	4	5	6
	7	8	9
		0

4 CH

VOL OK VOL

CH

Direct Tuning Example

Step	Action	Channel Banner
		Display
1	Press 1	1
2	Press 5	15
3	Press -	15-
4	Press 1	15-1
5	Press OK	15-1

Channel and Program Tuning

Channel and Program tuning in digital television differs from conventional television. With DTV, many programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the unit will also tune to a program and will indicate the channel and program in the on-screen Channel Banner display.

In order to select channels properly, Auto program must be performed (P. 29).

Follow the procedure below to directly enter the channel number using the NUMBER keys on the Remote Control.

Select analog channel

Note:

•If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected.

Unit Status display
Press the Channel<>or RECALL button, except when
the MENU screen is displayed, to display current unit
status information.
Channel Banner: Minimized
	Press CH<>to minimize the displayed
CH	channel banner. It will display the
VOL OK VOL	channel number, and the station
CH	identification (if available).

Basic Operation

1

2

1 2 3

4 5 6

7 8 9

0

CH

VOL OK VOL

CH

Press the NUMBER keys on the Remote Control to enter the Channel number. Press OK.

The following is an example of tuning to channel 15.

Direct Tuning Example

Step	Action	Channel Banner
		Display
1	Press 1	1
2	Press 5	15
3	Press OK	15

Channel Number

15-2

ABC - HD

Station identifier

Note:

•The Station identifier is not displayed when you use Split Screen mode.

Note:

•If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected.

Select digital channel

Channel Banner: Maximized

Press RECALL to maximize the

displayed channel banner.

Channel, Program and Station identifier

Program title

1	1	2	3
	4	5	6
	7	8	9
		0

2 PROG

If tuning a digital channel and your channel contains more than one program, press PROG and enter the program (1, 2, 3 etc.) using the NUMBER keys. Press OK. The following is an example of tuning to channel 15-1.

15-2			Andrew’s cooking show
ABC - HD	CC	SAP	TV-G		1080i			STANDARD	4 : 3		30
Closed Caption			Rating				Picture mode			Time remaining
							setting			in Sleep Timer
						resolution
SAP indication				Signal					Aspect

33