75

ENGLISH
speCiAl settinGs ----------------------------------------------------------------------------------------------------------
4 Select t he line »Automatic Channel Search«
with »
v
« or »
Λ
« and press
»oK«
to con-
firm.
Automativ Channel Search
Source
Automatic Service Update
CA - Modul
Active Antenna Power
Analogue Manual Tuning
Signal Information
Digital Manual Tuning
Program Table
Exit
Back
SOURECE SETUP
20.09.2010
15:46
Air
On
Not inserted
Off
OK
5 Select the line »Scan Typ« with »
v
« or »
Λ
«
and set the option »ATV« with »
<
« or »
>
«.
6 Start the scan with »« (red).
note:
7
After starting the scan, a security query will
appear. Press »« (green) to confirm the
option »Yes«.
– All channel and favourites lists for the ana-
logue channels will be deleted and com-
piled anew.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The search is complete as soon as the »PRO-
GRAM TABLE« appears.
note:
7
You can abort the search by pressing
»menu«.
7 Press »menu« to end the setting.
tuning analogue television channels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channels can be set directly or
using the scan.

switching the television to

analogue reception

note:
7
Analogue channels can be selected if the
option »Air« or »Cable« has been selected.
1 Open the »Select input source« menu with
»«.
2 Depending on the antenna system, select the
option »Air« or »Cable« with »
v
«, »
Λ
«, »
<
«
or »
>
« as the input source and press
»oK«
to confirm.
note:
7
Additional operations are explained in the
following sections.

setting all analogue television

channels

Analogue channels are displayed in the channel
list after the digital channels.
note:
7
Plug the rooftop antenna cable (for analogue
television channels) into the »Ant in«
socket on the television.
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press
»oK«
to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
v
« or »
Λ
«
and press
»oK«
to confirm.
Select the option »Air« or »Cable« with »
<
«,
»
>
«, »
v
« or »
Λ
« and press
»oK«
to con-
firm.