ENGLISH
78
inFormAtion ---------------------------------------------------------------------------------------------------------------------
Displaying signal information(for digital channels only)
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press
»oK«
to confirm.
3 Select the line »Signal Information« with
»
v
« or »
Λ
« and press
»oK«
to confirm.
– Information on the channel, network,
modulation, symbol rate, quality and
signal strength is displayed.
notes:
7
The signal information changes in ac cord-
ance with the current input source.
7 The signal properties are displayed in the
lower section of the menu. The further the
bars for »Quality« and »Signal Strenght«
extend to the right, the better the reception
signal.
7 The signal level not only depends on your
receiver system, but also on t he c hannel
which is currently active. Remember this
when aligning your antenna based upon
the signal level display.
4 Press »menu« to close the menu.