77
ENGLISH
Creating lists of favourites
You can select your favourite channels and save
them in up to four favourites lists (Fav 1 to Fav 4).
1 In the »PROGRAME TABLE« menu, switch
over to the list view with »« (yellow).
2
Select the preferred channel with »
v
«
or »
Λ
«.
3 Use »
<
« or »
>
« to ”push“ the c hannel into
one of the favourites lists 1 to 4 and press
»oK«
to confirm.
– The position in the favourites list is marked
with »«.
– You can enter the same channel in more
than one favourite list.
Each favourite list can store up to
255 channels.
note:
7
Channels can also be deleted from favour-
ites lists. Select
the
channel to be deleted
with »
v
«, »
Λ
«, »
<
« or »
>
«
and delete it with
»oK«
.
exiting the settings
1 Press »menu« to end the setting.
speCiAl settinGs ----------------------------------------------------------------------------------------------------------
entering channel names (8 digit maximum)
1 In the »PROGRAME TABLE« menu, select the
television channel with »
v
«, »
Λ
«, »
<
« or
»
>
« and press »« (red) to confirm.
2 Open the input keyboard with »« (green).
note:
7
If necessary, delet e the cur rent channel
name. To do this, select the » « button
with »
<
« or »
>
« and delete repeatedly using
»oK«
.
3 Select the required letters or numbers with
»
v
«, »
Λ
«, »
<
« or »
>
« and confirm with
»oK«
.
Repeat the entry for further letters/numbers.
note:
7
Use the »ABC« button to switc h to upper
case letters and use the »?@123« button to
switch to symbols and numbers.
4 Save the channel name by using »
v
«, »
Λ
«,
»
<
« or »
>
« to select »Submit« and confirm
with
»oK«
.
note:
7
If you wish to enter other channel names,
repeat steps 1 to 4.
skipping television channels
You can highlight television channels to be
skipped when you select with »
Λ
« or »
v
«.
Selection is still possible using the number
buttons.
1 In the »PROGRAME TABLE« menu, switch over
to the list view with »« (yellow).
2 Select the preferred c hannel with »
v
«
or »
Λ
«.
3 Select the column »Skip« with »
<
« or »
>
«
and use
»oK«
to mark the channel.
– The channel is marked using »«.
note:
7
Channels can also be reactivated. Select the
channel with »
v
« or »
Λ
«, then select the
column »Skip« and reactivate the channel
with
»oK«
.