Magnavox 1VMN26713A owner manual Channel Setting, Auto Channel Scan

To cycle through only the memorized channels, use [CHANNEL / ].

To select a channel directly (including the ones not memorized), use [the Number buttons] and [ • ] (for digital TV channels).

When scanning is over, press [SETUP] to exit.

5

“General Setting” menu will appear.

2 Use [K / L] to select “Channel”, then press [OK].

“Channel” menu will appear.

3 Use [K / L] to select “Auto Channel

Preset”, then press [OK].

4 Use [K / L] to select the type of broadcasting signal, then press [OK].

Auto Channel Preset

Antenna Cable (Analog)

Cable (Analog / Digital)

The unit will start getting channels available in your area.

• When aerial antenna is connected, select “Antenna”.

• When connected to CATV, select “Cable (Analog)” or “Cable (Analog / Digital)”.

To cancel the auto channel preset during scanning:

Press [RETURN] to go the previous screen or [SETUP] to cancel.

Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

1

CHANNEL SETTING

If you have changed antenna connection, we recommend

that you program available channels in your area with the following procedures.

Auto Channel Scan

Note

•If the auto channel preset is cancelled during presetting, some channels not yet preset may not be received.

•You cannot change the channel when either VCR or DVD is in any recording mode (basic recording, one- touch timer recording or timer recording).

28 EN