Magnavox 1VMN26713A owner manual Switching DVD / VCR Mode, How to Insert a Disc / Cassette Tape

BEFORE YOU START

Switching DVD / VCR Mode

Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate.

DVD mode	VCR mode
Press [SOURCE] on the front panel, or press [DVD] on the	Press [SOURCE] on the front panel, or press [VCR] on the
remote control.	remote control.
(Verify that the DVD indicator is lit.)	(Verify that the VCR indicator is lit.)

VCR button

DVD button

DVD indicator

SOURCE button

VCR indicator

Note

•You cannot switch the mode while in the timer-standby mode.

•Playback will stop when you change the output mode.

How to Insert a Disc / Cassette Tape

How to Insert a Disc

1)Press [DVD].

2)Press [OPEN/CLOSE A] to open the disc tray.

3)Place the disc on the disc tray with its label side facing up.

Align the disc to the disc tray guide.

4) Press [OPEN/CLOSE A] to close the disc tray.

It may take a while to load

the disc.

To eject the disc:

Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning the unit to the standby mode.

Note

How to Insert a Cassette Tape

1)Press [VCR].

2)Insert a cassette tape as illustrated below.

4 HEAD HI-FI STEREO

Cassette compartment

•Insert from the flap side first with the window side facing up.

To eject the cassette tape:

Press [C ASTOP/EJECT] on the front panel or press [OPEN/CLOSE A] on the remote control.

•If you turn this unit to the standby mode, [OPEN/CLOSE A] on the remote control is not available. Be sure to use [AOPEN/CLOSE] or [C ASTOP/EJECT] on the unit.

26 EN