Magnavox 1VMN26713A owner manual Press Stop C to exit the title list

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

4Press [REC] to start recording.“I” will be displayed for 4 seconds.

I SP(2Hr) 2h00m

Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC] again to restart recording.

5 Press [STOP C] to stop recording. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 70.) e.g.) DVD+R

Please finalize the disc when the writing is completed before playing back on other DVD players.

Writing to Disc 90%

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen. One-touch timer recording will start.

I0h30m

0h30m

(normal recording) 1h00m

6h00m 5h30m

1		SP(2Hr)
NOV/21/09 11:00AM CH12 SP
NOV/21/09		0:20:44
2
EMPTY TITLE
1:41:17	SP(2Hr)

• Press [STOP C] to exit the title list.

To change the recording length during the one-touch timer recording:

Press [REC] repeatedly until the desired length appear.

To cancel the one-touch timer recording within the specified time:

Press [STOP C].

Note

•When you press [REC], recording starts immediately and continues until the disc is full or you stop recording.

•This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 34-35 for more details.

•This unit cannot record in both stereo and SAP (secondary audio program) at the same time.

•You cannot change the recording mode during the recording pause mode.

•You can change a channel to be recorded during the recording pause mode.

Note for one-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning the power to standby to stop one-touch timer recording.

-Using [REC] or [STOP C] on the remote control.

•You cannot use the pause function during one-touch timer recording.

•When one-touch timer recording is finished and the power is turned to standby, the unit will switch to the timer- standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer- standby mode to use the unit continuously.

42 EN