Magnavox 1VMN26713A owner manual Press OPEN/CLOSE a, Repairing process MAY not work, Rec

TROUBLESHOOTING

	Symptom			Remedy
	The disc tray does not open when you			• It may take a few seconds for the disc tray to open after you have
	press [OPEN/CLOSE A].			recorded or edited a disc. This is because the unit is adding disc data to
				the disc.
	“Repairing” appears on the TV screen.			• If there is a power failure or unplugging during recording, finalizing,
				formatting or editing (even after “Repairing” disappears), a repairing
				process will begin automatically just after turning the unit on again.
		Repairing
DVD				It may take several minutes up to about several hours.
	In case you intend to cancel the			• If you intend to cancel the repairing process, press [AOPEN/CLOSE]
	repairing process.			on the front panel, then select “Yes” and press [OK]. After that, press
				[OPEN/CLOSE A] to take out the disc. The disc cancelled during the
			Do you want to cancel a repairing	repairing process MAY NOT work.
			process? When selecting “Yes”,
			the disc may not be usable.
			Yes
			No
		Repairing
	Picture noise appears.			• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
				(page 4).
				• Adjust tracking control for better picture by pressing [CHANNEL / ]
				while you are playing back a cassette tape.
VCR	The cassette tape does not play back.			• No cassette tape is inserted.
	Recording does not start after you press			• Make sure the cassette tape has an erase-protection tab when you
	[REC].			record to a cassette tape. If needed, cover the hole with cellophane
				tape.
	The remote control does not function.			• Check if a cassette tape is in this unit.
	The motor rotates even when			• The motor may rotate for the duration of approximately 5 minutes for
	playback / recording is stopped.			efficient operation. This is not a malfunction.

EN 99

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español