Magnavox 1VMN26713A owner manual Troubleshooting, Symptom Remedy

TROUBLESHOOTING

DVD • VCR

DVD

Symptom	Remedy
No image from HDMI connection.	• Check the HDMI connection. (Check the status of the HDMI related
	indications.)
	• Check whether the connected monitor device or other device supports
	HDCP. (This unit will not output a video signal unless the other device
	supports HDCP.)
	• Check the setting of HDMI.
	• Check whether the output format of this unit (HDMI FORMAT) matches
	the supported input format of other connected device.
	• If the unit is connected to the unauthorized display device with an
	HDMI cable, the audio/video signal may not be output when playing
	back a commercial DVD-video.
There is no sound or the sound is	• The HDMI sound is not output when “HDMI Audio” is set to “OFF”.
distorted.	• Check the RCA audio cable connection. If you are using HDMI-DVI
	conversion cable, you must connect the RCA audio cable, too.
	• Check whether the output format of this unit (HDMI FORMAT) matches
	the supported input format of other connected device.
Setup menu cannot be called up.	• Setup menus cannot be called up during DVD recording or DVD playback.
There is no picture.	• If the main menu appears on the TV screen, press [RETURN] to exit.
	• Check if the progressive scan mode is set correctly according to your TV
	(page 91).
Picture noise appears.	• Clean the disc with a cleaning cloth.
There is no sound.	• If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in
	“Disc Audio” (pages 86-87).
	• Clean the disc with a cleaning cloth.
Sound is noisy.	• Clean the disc with a cleaning cloth.
No DTS sound is output.	• This unit is not compatible with DTS sound.
The disc does not play back.	• No disc is inserted.
	• A blank disc is inserted.
	• The disc is upside down. Insert the disc with the labeled side facing up.
	• The disc is not correctly inserted.
	• The unit cannot play back certain discs (such as a CD-ROM) (page 56).
	• The region code on the DVD-video does not match the unit (page 56).
	• Moisture has condensed inside the unit. Remove the disc and leave the
	unit turned on for about 2 hours until the moisture evaporates (page 3).
	• If the disc was recorded on another recorder, the unit cannot play back
	the disc if it was not finalized.
Discs recorded on this unit cannot be	• If you are using DVD-RW/-R, please ensure you finalized the disc after
played back on other DVD players.	recording (pages 54-55).
The disc does not start playback from	• Resume playback was activated (page 62). Press [STOP C] twice.
the beginning.	• You have inserted a disc whose title menu or DVD menu automatically
	appears on the TV screen when it is first inserted.
The unit starts playing back the disc	• The DVD-video features an auto playback function.
automatically.
Some functions such as stop, search,	• Depending on the disc, you may not be able to do some of the
or slow-motion playback cannot be	operations. Refer to the instruction manual supplied with the disc.
performed.
The language for the sound track	• The title does not have the multilingual audio tracks.
cannot be changed.	• The DVD-video prohibits the changing of the language for the sound
	track.
The subtitle language cannot be	• Multilingual subtitle are not recorded on the DVD-video.
changed or turned off.
The angles cannot be changed.	• Multi-angles are not recorded on the DVD-video being played back.
	• The angle-change operation is whenever possible as long as the disc
	contains a multi-angle portion. Actual change will be performed when
	the portion has come up.
	• The DVD-video prohibits changing angles.
	• Try changing the angle using the DVD-video’s menu.
Recording does not stop immediately	• It may take a few seconds for the unit to input disc data before
after you press [STOP C].	recording stops.

98 EN