Magnavox 1VMN26713A owner manual Setting the Clock

Press [SETUP] to exit and turn the unit to the standby mode.

This unit will search for the time only when the power is in the standby mode. Initially leave it in standby mode for at least 15 minutes to give this unit time to set the clock. Once the clock is set, the unit receives the clock data at 12:00 am & 12:00 pm when unit is in standby mode. Check the time after the Auto Clock was set, if it is incorrect time then set the “Auto Clock Setting“ to “OFF” in step 4 above. Then try “Manual Clock Setting“ on page 32.

8

Use [K/ L] to select the desired time zone, then press [OK].

Time Zone

Atlantic

Eastern

Central

Mountain

Pacific

Alaska Hawaii

7

Use [the Number buttons] or [K/ L] to enter the desired major channel number to receive the Clock Data, then press [OK].

6

DTV

1

Set Channel No.

OFF

Auto

Manual

Auto Clock Setting

“General Setting” menu will appear.

Auto Clock Setting (cont’d)

SETTING THE CLOCK

	DIGITAL AUTO CLOCK SETTING	Note for auto clock setting
	Press [SETUP] and use [K/ L] to
		• The clock may set itself automatically after this unit
	select “General Setting”, then press	receives the antenna/cable signal and plug in the
1 [OK].		power cord.
		• If the clock is not set correctly, timer recording does
		not work properly.
2
	Use [K/ L] to select “Clock”, then	• Analog off the air broadcasts have ended. Analog
	press [OK].	auto clock setting will no longer be available except
		via Cable TV. Try digital auto clock setting in this
	“Clock” menu will appear.
		case.
3	Use [K/ L] to select “Auto Clock	• For digital auto clock setting, incorrect time may be
		obtained depending on the broadcast information.
	Setting”, then press [OK].	If this occurs, set the “Auto Clock Setting“ to “OFF” at
		step 4 and try “Manual Clock Setting“ on page 32.
4	Use [K/ L] to select “Manual”, then
	press [OK].	Time adjustment for each time zone
		Atlantic	GMT (Greenwich Mean Time ) - 4 hours
		Eastern	GMT (Greenwich Mean Time ) - 5 hours
		Central	GMT (Greenwich Mean Time ) - 6 hours
		Mountain	GMT (Greenwich Mean Time ) - 7 hours
	Enable Manual operation to select the DTV
	Channel for receiving the Clock Data and
		Pacific	GMT (Greenwich Mean Time ) - 8 hours
	selecting your Time Zone below.
		Alaska	GMT (Greenwich Mean Time ) - 9 hours
5	Press [{ ] to highlight “CH”. Press
		Hawaii	GMT (Greenwich Mean Time ) - 10 hours
	[K/ L] to select “DTV”, then press
	[ B] .

EN 31

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español