Using the Hydrotherapy Spa

The hydrotherapy spa is designed to seat six adults. The spa holds 300 gallons of water and offers a heat- ing system (80°F to 104°F), a filtration system, and adjustable hydrotherapy jets. Follow the guidelines below to use and maintain the spa for your long-term enjoyment.

WIRING THE HYDROTHERAPY SPA

The hydrotherapy spa is designed to operate with a 240-volt power source. It must be wired directly into a grounded circuit with a Ground Fault Circuit Interrupter (GFCI) capable of carrying 30 amps. No other appliance should be on the same circuit.

Connection of the spa to the 240-volt power source must be performed by a qualified, licensed electrician and must comply with all local, state, and federal electrical codes. Please refer to the instructions on the inside of the electronics package for information about connecting the spa to a 240-volt power source.

Once the spa is filled with water, the power can be turned on. Note: The first time the power is turned on, the spa will start automatically.

TESTING AND TREATING THE WATER

The first time you use the spa, you should test and treat the water. You must also treat the water each time you refill the spa. A test strip and a chemical pack are available at your local pool and spa store. Follow the directions carefully on the chemical pack to test and treat the water. Always keep the chemicals away from children and pets.

See WATER CHEMISTRY on page 13 for information concerning proper water maintenance.

STARTING THE HYDROTHERAPY SPA

You should always test the GFCI before using the hydrotherapy spa. First, turn on the spa by pressing the pump button on the console (see USING THE CONTROLS on page 12). Once the spa is running, press the GFCI “test” button. The spa should shut off. Press the “reset” button. The spa should resume nor- mal operation. If the spa continues to run after the “test” button is pressed, the GFCI is damaged. Do not use the spa until the GFCI has been repaired or replaced by a qualified electrician.

Once you have tested the GFCI, you should verify the water flow from the pumping unit. Set the air control

on the console to the lowest setting (see USING THE CONTROLS on page 12). The pumping unit will heat the water as it pumps. Cover the hydrotherapy spa with the spa cover. The spa cover must be tight (see SECURING THE SPA COVER ON THE SPA on this page). The water will heat at about 6°F per hour with the cover on. If you are using the spa indoors, and the room temperature is maintained at 70°F, it will take approximately 6 to 8 hours for the water to reach the set temperature.

The temperature and the water flow can be set or changed with the controls on the console (see USING THE CONTROLS on page 12).

SECURING THE SPA COVER ON THE SPA

To secure the spa cover, snap the latches on the spa

cover into the buckles on the Latch premium cedar panels.

To lock the buckles, insert	Key
the key and turn it clock-	Key
wise 1/4 turn. To unlock the
buckles, insert the key and
turn it counterclockwise 1/4	Buckle
turn. Always keep the
buckles locked when the

spa is not in use. Keep the keys in a safe place, out of the reach of children.

WLSB62810, WLSG62810 specifications

The Weslo WLSG62810 and WLSB62810 treadmills are two popular models designed for home fitness enthusiasts who appreciate a blend of performance, convenience, and affordability. Both treadmills offer a range of features and technologies that make them suitable for beginners and intermediate users looking to enhance their cardiovascular health and overall fitness.

One of the standout characteristics of the Weslo WLSG62810 is its space-saving design. The treadmill features a folding mechanism that allows users to easily store it away when not in use, making it an excellent choice for those with limited workout space. The sturdy construction ensures stability during workouts, accommodating users of various weights and sizes.

The WLSG62810 is equipped with a powerful motor that delivers smooth and consistent performance, allowing users to experience speeds ranging from 0 to 10 miles per hour. This feature is ideal for a range of workout styles, from brisk walking to high-intensity running. The 2-ply treadmill belt provides a comfortable surface that reduces impact on the joints, making it suitable for users looking for low-impact exercise options.

In addition, the Weslo WLSB62810 also shares similar motor specifications and speed capacities. Both models come with a user-friendly LCD display that tracks essential workout metrics, including time, distance, speed, and calories burned. This information is crucial for users who wish to monitor their progress and stay motivated throughout their fitness journey.

Another significant feature of these treadmills is the built-in workout programs. The WLSG62810 offers a variety of pre-set workouts designed by certified trainers to suit different fitness levels and goals. This feature provides users with guidance and structure, helping them to remain engaged and challenged as they progress.

Weslo treadmills are also designed with user comfort in mind. Both models are equipped with adjustable incline settings, allowing users to simulate outdoor terrains and increase the intensity of their workouts. Alongside this, the cushioned deck technology minimizes impact, enhancing comfort during exercise.

Lastly, the compact size and lightweight build of both models make them easy to move around the home, facilitating workouts in various locations. With their thoughtful design, technology, and user-friendly features, the Weslo WLSG62810 and WLSB62810 treadmills are excellent additions to any home gym. They are perfect for anyone seeking an accessible way to achieve their fitness goals and maintain an active lifestyle.