Weslo WLSG62810, WLSB62810 user manual Choosing a Location for the Hydrotherapy Spa

Page 7

Choosing a Location for the Hydrotherapy Spa

There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa.

If you set up the hydrotherapy spa inside:

1.The spa will increase the level of humidity in your home. The location you choose should be well ventilated. You may need to install a ventilation fan or use a dehumidifier.

2.The spa should be located near a 240-volt power source. It must be wired directly into a grounded circuit with a Ground Fault Circuit Interrupter (GFCI) capable of carrying 30 amps. No other appliance should be on the same circuit.

3.The spa should be close to a source of water.

4.Do not use the spa on carpet or other material that may be damaged by moisture. We recommend that you place the spa on a water- and stain-resis- tant, non-slip surface with a floor drain for any water that may splash from the spa.

5.Be sure that the location you choose is stable. It must be able to support the weight of the spa when it is filled with water, plus the weight of the occupants. The spa weighs approximately 2,900 pounds when it is filled with water.

6.Do not use the spa above a finished living area, due to the risk of water damage.

7.Be sure that there is room around the spa to per- mit servicing of the unit. The dimensions of the spa are 84” W x 84” L x 36” H. You should allow for this size when choosing the location.

8.The spa is not designed for in-floor installation. However, it is compatible with a deck system that is built flush with the top of the spa, provided you leave access to the motor for service.

9.Be sure to note any other considerations, such as aesthetics or privacy concerns, that may affect the safety or enjoyment of using the spa.

If you set up the hydrotherapy spa outside:

1.Check local building codes concerning the use of outdoor spas.

2.The spa should be located near a 240-volt power source. It must be wired directly into a grounded circuit with a Ground Fault Circuit Interrupter (GFCI) capable of carrying 30 amps. No other appliance should be on the same circuit.

3.The spa should be close to a source of water.

4.We recommend that you place the spa on a water- and stain-resistant, non-slip surface. Do not use the spa on rough or sharp surfaces such as gravel or wood chips.

5.Be sure that the location you choose is stable. It must be able to support the weight of the spa when it is filled with water, plus the weight of the occupants. The spa weighs approximately 2,900 pounds when it is filled with water.

6.Consider environmental factors such as rain, wind, shade, sunlight etc.

7.You should be able to monitor the use of the spa from your home, to prevent unauthorized use by children. You may want to enclose the spa with a fence and self-latching gate to prevent unautho- rized use.

8.Be sure that there is room around the spa to per- mit servicing of the unit. The dimensions of the spa are 84” W x 84” L x 36” H. You should allow for this size when choosing the location.

9.The spa is not designed to be installed below ground level. However, it is compatible with a deck system that is built flush with the top of the spa, provided you leave access to the motor for ser- vice.

10.Be sure to note any other considerations, such as aesthetics or privacy concerns, that may affect the safety or enjoyment of using the spa.

7

Image 7
Contents Customer HOT Line Model No. WLSB62810 WLSG62810 Serial NoPosting the Warning Sign Table of ContentsRead and Follow ALL Instructions Important Safety InstructionsPage Page Before You Begin If you set up the hydrotherapy spa outside If you set up the hydrotherapy spa insideChoosing a Location for the Hydrotherapy Spa Assembly Page Starting the Hydrotherapy SPA Using the Hydrotherapy SpaWiring the Hydrotherapy SPA Testing and Treating the WaterSpa Shell Diagram Using the Controls Maintenance Changing the Filter Cycle Removing and Attaching the Access PanelMaintaining the Proper PH Balance Sanitizing the Hydrotherapy SPAReplacing the Light Bulb Draining the PumpsTrouble-shooting Page Key No. Qty Description Part LIST- Model Nos. WLSB62810, WLSG62810 R1001AExploded DRAWING- Model Nos. WLSB62810, WLSG62810 R1001A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

WLSB62810, WLSG62810 specifications

The Weslo WLSG62810 and WLSB62810 treadmills are two popular models designed for home fitness enthusiasts who appreciate a blend of performance, convenience, and affordability. Both treadmills offer a range of features and technologies that make them suitable for beginners and intermediate users looking to enhance their cardiovascular health and overall fitness.

One of the standout characteristics of the Weslo WLSG62810 is its space-saving design. The treadmill features a folding mechanism that allows users to easily store it away when not in use, making it an excellent choice for those with limited workout space. The sturdy construction ensures stability during workouts, accommodating users of various weights and sizes.

The WLSG62810 is equipped with a powerful motor that delivers smooth and consistent performance, allowing users to experience speeds ranging from 0 to 10 miles per hour. This feature is ideal for a range of workout styles, from brisk walking to high-intensity running. The 2-ply treadmill belt provides a comfortable surface that reduces impact on the joints, making it suitable for users looking for low-impact exercise options.

In addition, the Weslo WLSB62810 also shares similar motor specifications and speed capacities. Both models come with a user-friendly LCD display that tracks essential workout metrics, including time, distance, speed, and calories burned. This information is crucial for users who wish to monitor their progress and stay motivated throughout their fitness journey.

Another significant feature of these treadmills is the built-in workout programs. The WLSG62810 offers a variety of pre-set workouts designed by certified trainers to suit different fitness levels and goals. This feature provides users with guidance and structure, helping them to remain engaged and challenged as they progress.

Weslo treadmills are also designed with user comfort in mind. Both models are equipped with adjustable incline settings, allowing users to simulate outdoor terrains and increase the intensity of their workouts. Alongside this, the cushioned deck technology minimizes impact, enhancing comfort during exercise.

Lastly, the compact size and lightweight build of both models make them easy to move around the home, facilitating workouts in various locations. With their thoughtful design, technology, and user-friendly features, the Weslo WLSG62810 and WLSB62810 treadmills are excellent additions to any home gym. They are perfect for anyone seeking an accessible way to achieve their fitness goals and maintain an active lifestyle.