Posting the Warning Sign, Using the SPA

POSTING THE WARNING SIGN

The included warning sign, shown below, must be posted on a wall or fence where it will be visible to all users of the spa. If the spa is moved, the sign must also be moved and reposted near the spa. If the sign becomes lost or illegible, call our toll-free Customer Hot Line at 1-877-897-7493 to obtain a free replace- ment sign. Post the sign as described above.

USING THE SPA

The spa is designed to seat two adults. The spa holds 150 gallons of water and offers an automatic, pro- grammable heating (70° F to 104° F) and filtration system. Seven thera-jets soothe and relax tired, sore muscles, and the strength of the massage is adjustable. Follow the guidelines below to use and maintain the spa for your long-term enjoyment.

PLUGGING IN THE SPA

Once the spa is filled with water, the power cord can be plugged in and the spa can be turned on. Note:

There is a Ground Fault Circuit Interrupter (GFCI) on the end of the power cord. Always test the GFCI before using the spa.

GFCI Grounded circuit capa- ble of carry- ing 15 amps

Test and Reset

Buttons

The first time the power cord is plugged in, the spa will turn on automatically.

When connecting the power cord, plug the power cord directly into a grounded circuit capable of carrying 15 amps. No other appliance should be on the same cir- cuit. Replace the power cord immediately if it becomes damaged.

First, turn on the spa by pressing the pump control on the console. Once the unit is running, press the GFCI “test” button. The spa should shut off. Press the “reset” button. The spa should resume normal opera- tion. If the spa continues to run after the “test” button is pressed, the GFCI is damaged. Do not use the spa until the GFCI has been repaired or replaced by a qualified electrician.