Slip Clutch Adjustment, Cleaning | Woods Equipment TS44, TS52

SLIP CLUTCH ADJUSTMENT

1.Turn off tractor engine and remove key.

2.Loosen nuts on springs until the springs can rotate freely, yet remain secure on the bolts.

3.Mark outer plates of slip-disc clutch as shown in Figure 11.

4.Securely attach implement to the tractor and start the tractor.

5.Engage PTO for several seconds then quickly dis- engage it.

6.Turn tractor off and remove key.

7.The friction lining plates should have "slipped", or moved. Check the marks placed on the outer plates of the slip-disc clutch in step 3 to make sure this is the case.

8.If clutch does not slip, check assembly for oil, grease and debris. Clean if necessary.

9.Reassemble clutch and tighten bolts no more than 1/8 of a turn at a time until desired setting of 1.31" compressed spring length.

10.If excessive slippage continues, check lining plates for excessive wear. They are 1/8" thick when new and should be replaced after 1/32" of wear to ensure proper operation.

Figure 11. Slip Clutch Adjustment

DRIVELINE SHEAR BOLT REPLACEMENT

■Always use approved M6 x 40 mm class 8.8 shear bolt as a replacement part. Using a hard- ened bold or shear pin may result in damage to driveline or gearbox.

1.Remove damaged shear bolt from yoke on input shaft of tiller gearbox.

2.Rotate driveline to align holes in yoke and shaft. Install shear bolt and secure the lock nut.

Cleaning

After Each Use

●Remove large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Inspect machine and replace worn or damaged parts.

●Replace any safety decals that are missing or not readable.

Periodically or Before Extended Storage

●Clean large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Remove the remainder using a low-pressure water spray.

1.Be careful when spraying near scratched or torn safety decals or near edges of decals as water spray can peel decal off surface.

2.Be careful when spraying near chipped or scratched paint as water spray can lift paint.

3.If a pressure washer is used, follow the advice of the pressure washer manufacturer.

●Inspect machine and replace worn or damaged parts.

●Sand down scratches and the edges of areas of missing paint and coat with Woods spray paint of matching color (purchase from your Woods dealer).

●Replace any safety decals that are missing or not readable (supplied free through your Woods dealer). See Safety Decals section for location drawing.

MAN0814 (3/11/2010)	Owner Service 17
MAN0814 (3/11/2010)

TS44, TS52 specifications

Woods Equipment has long been a trusted name in the lawn and landscape industry, and their TS52 and TS44 models showcase the brand's commitment to quality and performance. These front-mounted snow throwers are designed for use with compact tractors, offering a robust solution for snow removal and ground maintenance tasks.

The TS52 is a powerful 52-inch snow thrower, while the TS44 offers a slightly more compact 44-inch option. Both models feature durable construction, ensuring they can withstand the rigors of demanding winter conditions. Made from high-strength steel, these snow throwers boast a rugged build that prioritizes longevity, making them ideal for both residential homeowners and commercial operations.

One of the standout features of the TS series is the efficient drive system. Equipped with a heavy-duty auger and impeller, these machines deliver exceptional performance in snow removal, even in deep or heavy conditions. The auger design ensures optimal snow intake, while the impeller efficiently throws snow up to 30 feet away, maximizing clearing efficiency.

Both models come with adjustable skids that allow users to customize their height settings for varying surface conditions. This versatility is essential for different applications, whether clearing driveways, sidewalks, or larger areas. The TS52 and TS44 are also equipped with electric lift capabilities, allowing for effortless attachment and detachment from the tractor.

In terms of technology, Woods has integrated features that enhance usability and control. The easy-to-use controls allow operators to adjust the chute direction effortlessly, providing precise snow placement. This is particularly valuable in busy areas where clearing snow effectively while minimizing obstruction is crucial.

The TS series snow throwers are designed with user comfort in mind. Their ergonomic controls and balanced design contribute to a more pleasant operating experience, reducing fatigue during extended use. Additionally, the machines are compatible with a variety of compact tractors, making them a flexible choice for different users.

In summary, the Woods Equipment TS52 and TS44 snow throwers represent a blend of durability, efficiency, and user-friendly design. With their robust construction, innovative technologies, and adaptable features, these snow throwers are poised to tackle winter’s challenges, ensuring users can maintain clean, safe surfaces throughout the snow season. Whether for personal use or commercial applications, the Woods TS series delivers performance that snow removal professionals and homeowners alike can rely on.