DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
Inspect the equipment thoroughly after assembly to ensure it is set up properly before delivering it to the customer. The following check lists are a reminder of points to inspect. Check off each item as it is found sat- isfactory or after proper adjustment is made.
___ Check that all safety decals are installed and in good condition. Replace if damaged.
___ Check that shields and guards are properly installed and in good condition. Replace if dam-
| aged. |
___ | Properly attach implement to tractor and make all |
| necessary adjustments. |
___ | Check all bolts to be sure they are tight. |
___ | Check and grease all lubrication points as identi- |
| fied in “Service”. |
___ | Check that blades have been properly installed. |
DELIVERY CHECK
(DEALER’S RESPONSIBILITY)
___ Instruct customer how to lubricate and explain importance of lubrication.
___ Point out the safety decals. Explain their meaning and the need to keep them in place and in good condition. Emphasize the increased safety haz- ards when instructions are not followed.
___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.
___ Show customer the safe, proper procedures to be used when mounting, dismounting, and storing equipment.
___ Point out all guards and shields. Explain their importance and the safety hazards that exist when not kept in place and in good condition.
29929 (Rev. 3/28/2008) | Assembly 15 |
|
|