SPINDLE ASSEMBLY
REF | PART | QTY | DESCRIPTION |
1 | 4116 | 1 | Spindle |
2 | 5089 | 2 | Seal |
3 | 4114 | 1 | Sleeve |
4 | 4115 | 1 | Pin |
5 | 4107 | 2 | Bearing cone |
6 | 4117 | 1 | Housing with cups |
7 | 4106 | 2 | Bearing cup |
8 | 1972 | 1 | Grease fitting |
9 | 4105 | 1 | Spindle shaft |
10 | 4110 | 1 | Shoulder washer |
11 | 6950KT | 1 | |
11 | 26559KT | 1 | |
12 | 10658 | 1 | 5/8 NC x |
13 | 3490 | 1 | Blade bolt wrench |
14 | 2974 | 1 | Spindle lock wrench |
16 | 10635 | 2 | 5/8 Cup washer |
17 | 692 | 1 | 5/8 Flat washer |
18 | 1015825 | 1 | Blade bolt and washers, complete |
NOTE: When difficulty is experienced with a mower spindle, time and trouble will be saved by buying a complete new assembly.
NOTE: Repair shaft (9) and repair sleeve (3) do not have a hole drilled in them for pin (4). After new parts have been assembled and proper bearing adjustment obtained, drill a 3/16 diameter hole through sleeve and shaft. Drive in
29929 (Rev. 3/28/2008) | Parts 19 |
|