Woods Equipment L306 K50 manual Transportation, Maintenance, Storage

Page 6

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

„Do not stop, start, or change directions sud- denly on slopes.

„Use extreme care and reduce ground speed on slopes and rough terrain.

„Watch for hidden hazards on the terrain during operation.

„Stop power unit and equipment immediately upon striking an obstruction. Turn off engine, remove key, inspect, and repair any damage before resuming operation.

TRANSPORTATION

„Always comply with all state and local lighting and marking requirements.

„Never allow riders on power unit or attachment.

„Do not operate PTO during transport.

„Watch for hidden hazards on the terrain.

„Do not operate or transport on steep slopes.

„Do not operate or transport equipment while under the influence of alcohol or drugs.

MAINTENANCE

„Before dismounting power unit or performing any service or maintenance, follow these steps: disengage power to equipment, lower the 3-point hitch and all raised components to the ground, operate valve levers to release any hydraulic pres- sure, set parking brake, stop engine, remove key, and unfasten seat belt.

„Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.

„Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

„Never go underneath equipment (lowered to the ground or raised) unless it is properly blocked and secured. Never place any part of the body under- neath equipment or between moveable parts even when the engine has been turned off. Hydraulic

system leak down, hydraulic system failures, mechanical failures, or movement of control levers can cause equipment to drop or rotate unexpect- edly and cause severe injury or death. Follow Oper- ator's Manual instructions for working underneath and blocking requirements or have work done by a qualified dealer.

„Make sure attachment is properly secured, adjusted, and in good operating condition.

„Keep all persons away from operator control area while performing adjustments, service, or maintenance.

„Make certain all movement of equipment com- ponents has stopped before approaching for ser- vice.

„Frequently check blades. They should be sharp, free of nicks and cracks, and securely fastened.

„Do not handle blades with bare hands. Careless or improper handling may result in serious injury.

„Your dealer can supply genuine replacement blades. Substitute blades may not meet original equipment specifications and may be dangerous.

„Tighten all bolts, nuts, and screws to torque chart specifications. Check that all cotter pins are installed securely to ensure equipment is in a safe condition before putting unit into service.

„Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

„Make sure shields and guards are properly installed and in good condition. Replace if damaged.

„Wear gloves when installing belt. Be careful to prevent fingers from being caught between belt and pulley.

STORAGE

„Block equipment securely for storage.

„Keep children and bystanders away from stor- age area.

™

6Safety

L306 K50 Safety Rules (Rev. 11/3/2006)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Undermount Mower Introduction To the DealerTable of Contents LEA EL InstructivoSpecifications General InformationTraining SafetySafety Rules PreparationMaintenance TransportationStorage Safety & Instructional Decals Be CarefulOperation Cutting Height Adjustment WITH- OUT CastersCutting Height Adjustment with Casters OperationStarting & Stopping Mower Side Skid AdjustmentPRE-OPERATION Check List Commencing MowingMowing Techniques Mowing SpeedMowing Tips Uneven Terrain CleaningBlades After Each UseOwner Service Owner ServiceBlade Assembly LubricationSpindle Inspection Dealer ServiceDealer Service Removing Spindle from MowerAssembly Spindle InstallationPulley Installation Trouble Shooting Trouble Shooting Belt ConditionsTrouble Shooting Mowing Conditions Dealer SET-UP Instructions AssemblyAssembly Mower PreparationLift Chain Installation Belt Take-Up AssemblyBelt Installation on Mower Rear Lift Installation Rear Tractor Tire AdjustmentIdler Bracket Installation Tractor PreparationDrive Pulley Installation Front Lift Bracket InstallationDrive Pulley Alignment Left Front Lift Bracket Installation Attaching Mower to TractorBelt Alignment Belt InstallationPush Channel Attachment Belt TensionBlades Rear Belt Shield InstallationOptional Equipment CastersLeaf Mulcher Front RollerLeaf Mulcher PRE-DELIVERY Check List Dealer Check ListsDealer Check Lists Delivery Check ListL306 K50 Frame Assembly PartsL306 K50 Mounting Frame Assembly Rear 29714 16 x 3/8 x 1 KeyL306 K50 Mounting Frame Assembly Front L306 K50 Blade Assembly L306 K50 Blade Spindle AssemblyL306 K50 Belt TAKE-UP Assembly Front Roller Assembly OptionalL306 K50 Caster Assembly Optional Leaf Mulcher Assembly Optional Appendix Bolt Torque ChartSAE Series Torque Chart Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty Rev /23/2005 32695

L306 K50 specifications

Woods Equipment L306 K50 is a robust and reliable tool designed specifically for agricultural and landscaping applications. This versatile equipment offers various features that enhance its performance, making it a valuable asset for farmers, landscapers, and contractors alike.

One of the standout features of the L306 K50 is its impressive cutting width. With a cutting width of 6 feet, this mower allows for efficient and quick mowing, significantly reducing the time it takes to maintain large areas. The high-quality blades ensure a clean and precise cut, contributing to a well-manicured appearance for lawns and fields.

The construction of the L306 K50 is another highlight. Made with heavy-duty, durable materials, it is engineered to withstand tough conditions and heavy use. The robust frame provides stability and strength, allowing it to tackle more challenging terrains without compromising performance. This durability means less downtime for repairs and more time spent on the job.

Advanced technologies integrated into the L306 K50 further increase its efficiency. The mower features a unique deck design that optimizes airflow, resulting in superior grass lift. This design helps to ensure an even cut and contributes to a healthier lawn by promoting proper grass growth. Additionally, the mower's adjustable cutting height allows users to customize their cutting experience according to the specific requirements of different grass types and terrain.

Operator comfort and control are prioritized in the L306 K50. The user-friendly controls are designed for ease of operation, allowing both seasoned professionals and novice users to handle the machinery effectively. Furthermore, the mower’s compact design enhances maneuverability, making it suitable for navigating tight spaces and obstacles commonly found in landscaped areas.

Maintenance is simplified with the Woods Equipment L306 K50. The mower is designed for easy access to key components, making routine inspections and maintenance tasks straightforward. This thoughtful design ensures that users can keep their equipment in optimal condition without the need for extensive tools or time.

Overall, the Woods Equipment L306 K50 stands out for its blend of power, versatility, and user-friendly design. With its high cutting performance, durable construction, and advanced features, it is an excellent choice for anyone looking to maintain expansive landscapes or agricultural areas with efficiency and ease. Whether for professional landscaping or personal use, the L306 K50 is designed to deliver outstanding results in a wide array of mowing tasks.
Top Page Image Contents