Operation, Daily Check List | Woods Equipment L306 K50 specs

OPERATION

The designed and tested safety of this machine depends on it being operated within the limitations as explained in the manual. Be familiar with and follow all safety rules in this manual, the tractor manual and safety decals on the tractor and mower.

A WARNING

■Do not exceed PTO speed of 1000 rpm maxi- mum.

The safe operation of this machine is the responsibility of the operator. The operator should be familiar with the mower and tractor and all safety practices before starting operation. Read and follow the safety rules on page 5 through page 7.

The mower is designed for lawn or grass mowing. It is not designed for rough conditions or heavy weed mow- ing.

It is equipped with suction type blades for best results in lawn mowing. Optional low suction blades are avail- able for use in sandy conditions.

The warranty for this mower appears on the inside back cover of this manual. Record the model and serial numbers of your mower in the spaces provided above the warranty. Provide this information to your dealer to obtain correct repair parts.

Take all possible precautions when leaving tractor unattended: disengage PTO, lower mower, shift into neutral, set parking brake, stop engine and remove key from ignition.

DAILY CHECK LIST

___ Check that mower is properly and securely attached to tractor.

___ During inspection, check that all nuts and bolts are secure and clevis pins are properly cotter pinned.

___ Check condition of blades and security of attach- ment.

CUTTING HEIGHT ADJUSTMENT WITH- OUT CASTERS

Mower cutting height is raised, lowered and maintained using tractor hydraulics and lift chains. Proper lift chain adjustment is essential. The chains must be adjusted so that tractor lift arms are in their highest position before the lift or any part of mower is within 1/4" of con- tacting tractor or mower lift stops. Improper lift chain adjustment could result in damage to lift mechanism or tractor.

Adjustment is accomplished by lowering lift arms and inserting lift chains into keyhole lift lugs. Raise the mower, checking to ensure it does not contact any part of tractor. Take up links, one or two at a time, until the desired height is obtained.

There is a long and short slot in the rear lift lugs. Level mower by using these slots as needed.

After setting upper lift limit, lower mower to desired cut- ting height. Set lower stop of mower hydraulic control lever at this point. This will allow you to raise the mower when necessary and return to the pre-set cutting height.

CUTTING HEIGHT ADJUSTMENT WITH CASTERS

The caster arm has five holes for adjustment. Cutting height is adjusted by changing the adjustment bracket hole alignment with the caster arm.

There are two holes on the frame rail to mount the caster arm. Use the rear hole for settings up to 3". Use the front hole for settings above 3".

Whenever adjustments are made to the casters, care- fully raise mower to ensure casters do not come in con- tact with any part of tractor. Should any interference occur, readjust lift chains.

Set lower stop of tractor hydraulic control lever to pre- vent chains rubbing belt.

IMPORTANT

■Be sure lift chains do not interfere with drive belt.

■Always raise mower off casters when backing up and turning at the same time to prevent casters from locking up on front tires.

Attitude Adjustment

Figure 1. Attitude Adjustment

Place tractor and mower on a level surface to check and adjust mower attitude. For best mowing results, dimension “A” should not be more than 1/2" higher and never lower than dimension “B” (except when using a leaf mulcher or with some tractor tire configurations, it may be necessary to adjust rear of mower approxi-

8 Operation	32695 (Rev. 11/17/2006)

L306 K50 specifications

Woods Equipment L306 K50 is a robust and reliable tool designed specifically for agricultural and landscaping applications. This versatile equipment offers various features that enhance its performance, making it a valuable asset for farmers, landscapers, and contractors alike.

One of the standout features of the L306 K50 is its impressive cutting width. With a cutting width of 6 feet, this mower allows for efficient and quick mowing, significantly reducing the time it takes to maintain large areas. The high-quality blades ensure a clean and precise cut, contributing to a well-manicured appearance for lawns and fields.

The construction of the L306 K50 is another highlight. Made with heavy-duty, durable materials, it is engineered to withstand tough conditions and heavy use. The robust frame provides stability and strength, allowing it to tackle more challenging terrains without compromising performance. This durability means less downtime for repairs and more time spent on the job.

Advanced technologies integrated into the L306 K50 further increase its efficiency. The mower features a unique deck design that optimizes airflow, resulting in superior grass lift. This design helps to ensure an even cut and contributes to a healthier lawn by promoting proper grass growth. Additionally, the mower's adjustable cutting height allows users to customize their cutting experience according to the specific requirements of different grass types and terrain.

Operator comfort and control are prioritized in the L306 K50. The user-friendly controls are designed for ease of operation, allowing both seasoned professionals and novice users to handle the machinery effectively. Furthermore, the mower’s compact design enhances maneuverability, making it suitable for navigating tight spaces and obstacles commonly found in landscaped areas.

Maintenance is simplified with the Woods Equipment L306 K50. The mower is designed for easy access to key components, making routine inspections and maintenance tasks straightforward. This thoughtful design ensures that users can keep their equipment in optimal condition without the need for extensive tools or time.

Overall, the Woods Equipment L306 K50 stands out for its blend of power, versatility, and user-friendly design. With its high cutting performance, durable construction, and advanced features, it is an excellent choice for anyone looking to maintain expansive landscapes or agricultural areas with efficiency and ease. Whether for professional landscaping or personal use, the L306 K50 is designed to deliver outstanding results in a wide array of mowing tasks.