Woods Equipment 59C-2 manual Dealer Check Lists, Leaf Mulcher Optional, PRE-DELIVERY Check List

Page 15

LEAF MULCHER (OPTIONAL)

Turn mower upside down on saw horses. If mower has a bolt-on front shield, adjust shield all the way down in long slots. Remove side shields. Leave side skids on. If optional front roller has been installed, it must be removed.

On mowers with bent-down front frame, remove center baffle and drill three 7/16 diameter holes (two on 59’s) in front of mower at the dimensions shown on drawing on page 20.

Attach slotted angles (2) or (3 & 4) to leaf mulcher.

Place leaf mulcher over blades on mower. Attach angles (2) or (3 & 4) and mower side shields to side frame angle on mower. All 59 mowers with bolt-on front shield will use front shield hole to attach angles (2) or (3 & 4).

On mowers with bolt-on front shield, bolt front of leaf mulcher to bottom of slots in front shield with 3/8 x 1" bolts and flat washers. On mowers with bent-down front frame, bolt leaf mulcher to inside of mower in holes drilled in front frame using 3/8 x 1-1/2 bolts and 5/8 long pipe spacers between leaf mulcher and mower. On some mowers where 5/8" pipe may be too long, substitute

3/8 flat washers.

Drill 7/16 holes in rear of mower deck through holes in leaf mulcher rear plates and bolt rear of leaf mulcher to deck using 3/8 x 1" bolts.

Tighten all bolts securely. Turn each blade individually inside the leaf mulcher to see that it clears the leaf mulcher rings. If necessary, the rings may be re- shaped with a hammer to clear the leaf mulcher rings.

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

Inspect the equipment thoroughly after assembly to ensure it is set up properly before delivering it to the customer.

The following check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.

___ Check that all safety decals are installed and in good condition. Replace if damaged.

___ Check that shields and guards are properly installed and in good condition. Replace if dam-

 

aged.

___

Properly attach implement to tractor and make all

 

necessary adjustments.

___

Check all bolts to be sure they are tight.

___

Check and grease all lubrication points as identi-

 

fied in “Service”.

___

Check that blades have been properly installed.

DELIVERY CHECK

(DEALER’S RESPONSIBILITY)

___ Instruct customer how to lubricate and explain importance of lubrication.

___ Point out the safety decals. Explain their meaning and the need to keep them in place and in good condition. Emphasize the increased safety haz- ards when instructions are not followed.

___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.

___ Show customer the safe, proper procedures to be used when mounting, dismounting, and storing equipment.

___ Point out all guards and shields. Explain their importance and the safety hazards that exist when not kept in place and in good condition.

29927 (Rev. 3/14/2008)

Assembly 15

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Rotary Mower To the Dealer IntroductionGeneral Information Table of ContentsPreparation SafetySafety Rules TrainingMaintenance TransportationStorage Be Careful Safety & Instructional DecalsTo Avoid Serious Injury or Death Tractor Operating Instructions OperationOperation Mowing GrassMower Spindle Assemblies HOW to Solve Belt ProblemsSide Discharge & Discharge Chute Optional EquipmentCleaning How to Align a Twisted BeltAssembly AssemblyLift Attachment See ShieldingCasters 2 Idler Bracket 2 Lift & Mounting Assembly Photo Delivery Check Dealer Check ListsLeaf Mulcher Optional PRE-DELIVERY Check ListParts Part QTY Description 59 & L59 Casters L306 Casters 59 & L306 Leaf Mulcher Lift Chain Hook-Up Table Manual Height Adjustment Chain see chart for chain used on Spindle Assembly Metric Series Bolt Torque ChartSAE Series Torque Chart AppendixAbbreviations Bolt Size ChartWarranty Woods Equipment Company

59C-2 specifications

The Woods Equipment 59C-2 is a robust and versatile implement that embodies the quality and durability associated with the Woods brand. Designed for compact tractors, this rotary cutter is a perfect solution for maintaining pastures, fields, and overgrown areas. It offers a combination of efficiency and performance, making it a favorite among agricultural operators and landowners alike.

One of the main features of the 59C-2 is its rugged construction. Built with a heavy-duty frame and premium materials, this cutter can withstand the rigors of daily use. Its 59-inch cutting width allows it to cover substantial areas quickly, increasing productivity. The cutter's design is also optimized for maneuverability, making it effective in tight spaces and around obstacles.

A standout characteristic of the Woods 59C-2 is its heavy-duty heat-treated blades. These blades are engineered to provide a clean and precise cut, ensuring that grass and brush are evenly trimmed. The blades are also replaceable, allowing users to maintain optimal cutting performance over time. This feature significantly reduces maintenance costs and extends the life of the cutter.

In terms of technology, the 59C-2 incorporates a slip clutch protection system. This system is essential for safeguarding the tractor and implement from potential damage caused by unexpected obstacles. When the blades encounter a tough object, the slip clutch disengages, preventing undue strain on the drivetrain and ensuring a longer lifespan for both the tractor and rotary cutter.

Another notable aspect of the Woods 59C-2 is its adjustable cutting height capability. Operators can easily set the desired height from 1.5 to 4 inches, allowing for flexibility in different mowing conditions and crop types. This adaptability is particularly beneficial for varying terrain and growth levels, providing a tailored approach to land management.

To facilitate easy attachment to a variety of compact tractors, the Woods 59C-2 features a universal mounting system. This design ensures a quick and straightforward setup, allowing operators to switch between implements seamlessly.

Overall, the Woods Equipment 59C-2 rotary cutter stands out for its durable construction, advanced technology, and versatile features, making it an excellent choice for anyone looking to maintain their property with efficiency and ease. Whether tackling tall grass or thicker brush, this implement demonstrates the quality performance that Woods Equipment is known for.
Top Page Image Contents