5.5Help File
The HELP file accessible from within the PC Editor will be updated as necessary. Since software updates after the printing of this manual may affect the instructions provided here, please check the Help File for any later remarks.
5.6Introduction to the PC Editor
When you launch the editor on your PC, you will see the opening screen following (later software versions may differ). Each of the numbered sections is explained in this page - just look for the number icons within the text.
Please note that a Windows compatible PC Editor is available for free download form our web site.(see page 7)
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Click on one of the icons on the PC Editor, a window will appear showing one of several "pages" where you can set the parameters using virtual knobs and sliders or by typing the values. Here is a brief overview of the various functions that make up the PC Editor (community software). Each is explained in more detail in the next sec- tion.
1NOTCH
You can turn on or off the dynamic notch filter and adjust its parameters.
2NOISE GATE
You can set the DPA unit to cut the signal if it falls below a certain level. Most often used to cut the back- ground noise between music tracks.
3COMP
It's a
4MASTER DELAY
Allows a delay to be applied in order to time align" each individual output channel.
5CROSSOVER (XOVER)
The DPA unit is equipped with independent
6EQ
Each of the channel has a fully variable
7GAIN
From here you can adjust the OUTPUT LEVEL, the MUTE, the PHASE etc.
8CMP/LIM
Each output channel has its own independent COMPRESSOR/LIMITER.careful setting of this parametens will help to maintain a more consistant and pleasant listening level and extend the performance of youn sp- eakers.
10