Watkins MAL, LAP Balancing the PH, Maintaining the Sanitizer Level, Water Quality and Maintenance

Page 25

BALANCING THE PH

A. The ideal pH level for your spa water is 7.4-7.6.

B. The pH level is the measure of acidity and alkalinity. Values above 7 are alkaline; those below 7 are acidic. Maintaining the proper pH level is extremely important for:

• Optimizing the effectiveness of the sanitizer.

• Maintaining water that is comfortable for the user.

• Preventing equipment deterioration.

C. If the spa water’s pH level is too low, the following may result:

• The sanitizer will dissipate rapidly.

• The water may become irritating to spa users.

• The spa’s equipment may corrode.

If the pH is too low, it can be increased by adding sodium hydrogen carbonate, or

Hot Spring® FreshWater® pH/Alkalinity Up, to the spa water.

D. If the pH level is too high, the following may result:

The sanitizer is less effective.

Scale will form on the spa shell surface and the equipment.

The water may become cloudy.

The filter cartridge pores may become obstructed.

If the pH is too high, it can be decreased by adding sodium bisulfate, or Hot Spring FreshWater pH/Alkalinity Down, to the spa water.

NOTE: After adding sodium hydrogen carbonate, or sodium bisulfate, wait two hours before testing the water for pH. Measurements taken too soon may not be accurate.

E.It is important to check the pH on a regular (weekly) basis. The pH will be affected by the bather load, the addition of new water, the addition of various chemicals, and the type of sanitizer used.

F.When the pH is within the recommended range, proceed to the final step.

MAINTAINING THE SANITIZER LEVEL

A.Sanitizer is extremely important for killing algae, bacteria and viruses, and preventing unwanted organisms from growing in the spa. At the same time, you don’t want too high a sanitizer level, or it can irritate your skin, lungs and eyes.

B.Always maintain the sanitizer level in your spa at the recommended level for each type of sanitizer.

C.Watkins recommends the following sanitizer:

Spa Frog® sanitizing system (mineral and bromine)

C.Watkins also approves the following sanitizers:

Sodium Dichloro-s-Triazinetrione (sodium dichlor or chlorine)

Baqua Spa® (please consult your Baqua Spa manual for instructions on the use of this product).

Brominating Concentrate (one step granular bromine)

WARNING: DO NOT use tri-chlor chlorine, bromo-chloro-dimethyl-hydantoin (BCDMH), or any type of compressed bromine or chlorine, acid, or any type of sanitizer which is not recommended by Watkins Manufacturing Corporation.

Page 22 Water Quality and Maintenance

Image 25
Contents N e r ’ s M a n u a l OwnerÕs Manual Table of Contents Important Safety Instructions Safety InformationAvoiding the Risk to Children DonõtUnclean water Health problems affected by spa useRisks to Avoid Avoiding the Risk of HyperthermiaImportant SPA Instructions Installation InstructionsSite Preparation Deck Installation Outdoor and Patio InstallationINDOOR/BASEMENT Installation Installation InstructionsSPA Cover Installation Electrical InstallationSelecting the Voltage for Your SPA Volt ConversionSorrento Trinidad Jumper Configuration Volt Subpanel Wiring InstructionsLA Palmatm Model LAP Spa Specifications & IllustrationSpa Frog 8 Spa Specifications & Illustration SPA Specifications & IllustrationMallorca Model MAL Overhead ViewSorrento Model SOR Trinidad Model TRI 10 Spa Specifications & IllustrationOperating Instructions START-UP and Refill ProceduresOperating Instructions Hydromassage Jets Heating and Hydromassage SystemsPrecision Jets AIR Control SystemSPA Control Panel Safety EquipmentSplendors LED Lighting Optional Clean CycleFilter Cycles La PalmaTM & Mallorca Spas onlyStereo Control Panel Mode Button Locking FeaturesMusic Sound System JET Pump 2 JET System JET Pump 1 JET SystemJet Menu Directional Precision Jets on back left wall JET PumpDirectional Precision Jets on back right wall Directional Precision Jets in loungeJET System Sorrento Model SOR JET System MenuTrinidad Model TRI JET System Menu Methods for Testing the SPA Water Water Quality and MaintenanceGeneral Information Water Quality and Maintenance HOT Spot SPA Water Maintenance ProgramFilling the SPA with Water Balancing the Total Alkalinity TABalancing the PH 22 Water Quality and MaintenanceMaintaining the Sanitizer Level Ideal pH level for your spa water isSPA Frog Water Care System SPA Frog Cartridge Replacement InstructionsIdeal Range ppm StepsFollowing the SPA Frog Sanitizer Routine 24 Water Quality and MaintenanceDoõs and Donõts Supplemental Water MaintenanceBromine Super Chlorination26 Water Quality and Maintenance Cleaning the Ozone InjectorFoam Inhibitors Common Water Chemistry Questions Question Why can’t I fill my spa with soft water?Filter Maintenance Maintenance and SPA Care28 Maintenance and Spa Care Water TerminologyCare of the SPA Pillows Maintenance and Spa CareLA Palma To remove and replace the spa pillowsCare of the SPA Cover Care of the ExteriorWood SPA Cabinet Simulated SPA CabinetNON-OPERATION in Cold Climate Winterizing Your SPAMiscellaneous Service Information Service InformationActs Invalidating Warranty Service InformationDisclaimers Watkins Customer ServiceProblem Probable causes Solutions TroubleshootingPage Watkins Manufacturing Corporation Vista, California USA

TRI, SOR, MAL, LAP specifications

Watkins MAL, LAP, SOR, and TRI represent a suite of advanced technology products designed for various applications across multiple industries. These systems are integral to enhancing efficiency, flexibility, and automation within operational workflows.

Watkins MAL, or Modular Automation Layer, serves as a flexible framework enabling the seamless integration of diverse automation systems. The architecture focuses on modularity, allowing users to customize their automation setup according to specific requirements. This feature significantly reduces installation time and costs while promoting scalability as businesses grow. The primary technology underpinning MAL is a robust communication protocol that ensures compatibility with various industrial devices, facilitating real-time data exchange and operational synchronization.

LAP, or Logistics Automation Platform, is tailored specifically for optimizing supply chain processes. It leverages advanced algorithms and machine learning to enhance inventory management, shipment tracking, and demand forecasting. LAP’s main characteristic is its intuitive user interface, providing users with comprehensive dashboards that present key performance indicators in real time. The integration of Internet of Things (IoT) technology allows it to connect with sensors and devices across the logistics network, optimizing various stages from warehousing to transportation.

SOR, which stands for Smart Operational Resilience, emphasizes risk management and sustainability in operations. This platform utilizes data analytics and predictive modeling to identify potential disruptions in the supply chain or production lines. It helps organizations develop contingency plans and build resilience against unforeseen challenges. The characteristic that sets SOR apart is its focus on sustainability, integrating eco-friendly practices and promoting resource conservation through its operational protocols.

Finally, TRI, or Technology Resource Integrator, is designed for comprehensive resource management across an organization. TRI enables businesses to consolidate various assets and technologies, ensuring optimal usage and performance. Its primary feature is a central management dashboard that provides insights into resource allocation, utilization rates, and operational efficiency. TRI integrates seamlessly with existing systems, utilizing APIs and standard protocols to ensure a cohesive technological ecosystem.

In conclusion, the Watkins suite encompassing MAL, LAP, SOR, and TRI provides businesses with innovative solutions to modern challenges. By focusing on automation, logistics optimization, operational resilience, and resource integration, Watkins enhances productivity and promotes sustainable growth in an increasingly competitive market.