Swisher WB800-42F Wheel Drive Belt Replacement Removal, Wheel Brake Adjustment, Procedure

Page 4

WHEEL DRIVE BELT REPLACEMENT

REMOVAL

Stop engine, let all moving parts come to a complete stop. Disconnect spark plug.

Remove belt cover.

Remove Blade Drive Belt, (See “Blade Drive Belt replacement”)

Locate belt guide for wheel drive belt and loosen.

Remove wheel drive belt.

INSTALLATION

Install belt as shown.

Adjust belt guide snug against motor pulley and back off ?”.

Tighten belt guide hardware.

Install Blade Drive Belt (see “Blade Drive Belt installation”).

Install belt cover and tighten hardware.

Check for loosened bolts, nuts, springs, etc. often. Replace filters, spark plugs as needed. Keep blades in good working order.

Adjust Nuts

WHEEL BRAKE ADJUSTMENT

Adjustment may be necessary if the unit does not stay in position on a hill with the operator bails released, or if the brake drags while in neutral with the “GROUND CONTROL” bail engaged.

PROCEDURE

Stop engine, let all moving parts come to a complete stop. Disconnect spark plug.

Release “GROUND CONTROL” bail.

Adjust nuts forward or backward. When the “GROUND CONTROL” bail is disengaged there should be constant tension on the brake arm.

All tension should be off brake arm when “GRO UND CONTROL” bail is engaged.

Tighten adjustment nut when finished and re -attach spring, if necessary.

WHEEL DRIVE BELT ADJUSTMENT

Adjustment may be necessary if loss of traction occurs due to belt slippage.

PROCEDURE

Adjust “GROUND CONTROL” cable in or out to achieve maximum traction.

Too much tension will not allow the “GROUND CONTROL” bail to fully activate.

Too little tension will allow the belt to slip, resulting in loss of traction.

“GROUND CONTROL” bail should fully close against handlebars when functioning properly.

Image 4
Contents Model no ONWB842Safety and Operational Decals OD29 Spinning Blade DecalService and Adjustments Belts Configuration Blade Spindle Belt Replacement RemovalInstallation Blade Drive Belt Replacement RemovalWheel Drive Belt Replacement Removal Wheel Brake AdjustmentProcedure Wheel Drive Belt AdjustmentOverall Assembly Replacement Parts T2SMX 10 GA Washer Swisher Mower & Machine CO. INC

WB800-42F specifications

Introducing the Swisher WB800-42F, a versatile and powerful wood chipper designed to tackle a range of outdoor debris management tasks with ease. This robust piece of equipment excels in chipping branches, brush, and yard waste, making it an essential tool for homeowners and landscape professionals alike.

At the heart of the WB800-42F is its powerful 8 HP engine, which provides the muscle needed to efficiently chip materials up to 4 inches in diameter. This engine is designed for reliability and performance, ensuring that users can depend on the chipper to get the job done quickly and effectively. With easy pull-start operation, users can start chipping in no time, allowing for efficient yard cleanup.

One of the standout features of the WB800-42F is its heavy-duty construction. Built with a sturdy steel frame, this wood chipper is designed for longevity and durability, ensuring that it can withstand the rigors of frequent use. The large in-feed chute is strategically positioned for easy loading of branches and brush, while the 42-inch discharge chute ensures that wood chips are spread evenly and efficiently.

Incorporating advanced engineering technologies, the WB800-42F features a high-precision chipper blade system that delivers clean and consistent chips. The dual knife design not only enhances cutting efficiency but also minimizes the need for frequent blade sharpening, allowing for extended use between maintenance. Furthermore, this wood chipper offers a user-friendly operation that allows even novice users to handle it confidently.

Safety is a key consideration with the WB800-42F. The chipper includes safety features such as a protective shield over the feed opening, which minimizes the risk of debris ejection. Additionally, the unit is equipped with a safety switch that automatically shuts off the engine if any irregularities occur, promoting safe usage.

In terms of maneuverability, the Swisher WB800-42F is equipped with a convenient wheel and towable design, allowing for easy transportation across various terrains. This feature simplifies the process of moving the chipper from storage to the work site or between different areas of your property.

Overall, the Swisher WB800-42F wood chipper stands out with its power, durability, and efficient design. Whether you're tackling seasonal yard cleanup, managing landscaping projects, or simply maintaining your property, this robust wood chipper is designed to meet your needs effectively while making the process seamless.