Swisher T13560, T1360K, T17560 Breaking in Your Mower, Mower Height Adjustment, Starting to MOW

Page 8

Make sure the tow vehicle parking brake is set, mower is level, and blades are disengaged.

Check spark plug wire, oil, and fuel.

Check all electrical connections (See Schematics).

Make sure toggle switch is turned “ON” and the red tether is properly attached.

Set engine idle to “CHOKE” position.

With feet clear of mower deck, turn key switch to the “START” position; [ if unit is equipped with 12 volt system ] release when engine begins to run.

For units NOT equipped with electric start turn key to “ON” position and pull starter Rope until engine starts.

Set engine idle at desired RPM.

BREAKING IN YOUR MOWER

Set vehicle parking brake or chock wheels to prevent accidental rolling.

Start engine properly.

Slowly, engage blade control.

In a safe environment, i.e. no children, allow blades to rotate and engine to idle for 5 minutes. This breaks in the belts and the engine.

Stop mower properly.

CAUTION!

SHUT OFF MOWER ENGINE AND REMOVE SPARK PLUG WIRE FROM

SPARK PLUG BEFORE MAKING ANY ADJUSTMENTS TO THE MOWER.

MOWER HEIGHT ADJUSTMENT

Adjust while mower is not running.

The cutting range is approximately 1.5” to 4.5”. The height has been measured from the ground to the blade tip without the engine running.

Rotate height adjust crank handles (H7N) in a clockwise direction to lift the mower deck. A counter-clockwise direction is used to lower the mower deck.

Make sure the height adjustment is the same at side crank handles. For best results, see “SUGGESTED PRACTICE” section. Graduated scales are for reference only, not the actual cutter height.

Place crank handle in a retracted position to maintain height adjustment.

STARTING TO MOW

Adjust the cutting height.

Double check vehicle to mower attachment.

Start mower engine properly.

Slowly, activate the blade engage lever (6008) by rotating it forward and left until the lever locks into place.

Carefully mount tow vehicle and start mowing slowly.

8

Image 8
Contents Finish CUT Trailmower Limited Warranty Safety Precautions Since Safety Decals 661A Starting the Engine Intended USEAttaching Trailmower to TOW Vehicle Starting to MOW Mower Height AdjustmentBreaking in Your Mower General Trouble Shooting Alternative Stopping MethodTransporting Mower Suggested Mowing PracticesMower Maintenance Blade Driver Assy Mower Deck Detail Heat Shield 6052TK Not Used on Honda Units Parts not ShownEngine Detail DetailWiring Schematics HOW to Order Repair Parts Finish CUT Trailmower

T1360T, RK1360, T1360H, T13560, T17560 specifications

Swisher has long been a respected name in the outdoor power equipment industry, particularly known for its innovative and durable zero-turn mowers. The Swisher RK1360, T17560, T1360T, T1360H, and T1360K models stand out in their lineup, each boasting unique features and technologies designed to enhance performance, efficiency, and user experience.

The RK1360 is a robust riding mower that excels in cutting efficiency thanks to its powerful 14.5 HP OHV engine. With a cutting width of 60 inches, this model enables quick mowing of large areas, making it ideal for both residential and commercial users. The RK1360's reliable manual transmission provides smooth operation and easy control, allowing users to navigate various terrains with ease.

The T17560 is another model that showcases Swisher's commitment to performance. Equipped with a 17.5 HP engine, it offers an impressive cutting width similar to that of the RK1360, allowing for efficient mowing. The T17560 features a hydrostatic transmission, providing superior maneuverability and speed, which is especially beneficial in tight spaces. The engine's reliability and ease of maintenance ensure longevity and consistent performance.

Moving on to the T1360T, this model features a heavy-duty design suitable for even more challenging mowing conditions. The T1360T is powered by a reliable engine that delivers ample torque and power, hence it can tackle thick grass and uneven terrain. One of its main characteristics is the adjustable cutting height, which allows users to customize their mowing experience according to the specific requirements of their lawn.

The T1360H adds a bit of sophistication with enhanced comfort features, including a plush seat and ergonomic controls. With a powerful engine and an impressive cutting deck, it combines user-friendly design with exceptional mowing capabilities. Its advanced chassis helps in reducing vibrations, allowing for a smoother ride even over bumpy terrain.

Lastly, the T1360K model retains the core performance features found in Swisher's range while being distinguished by its compact size. This makes it especially favorable for residential use in smaller yards. Despite its compactness, the T1360K does not compromise on power or efficiency, making it an excellent choice for homeowners seeking quality without the bulk.

In summary, the Swisher RK1360, T17560, T1360T, T1360H, and T1360K models illustrate the brand's dedication to creating innovative mowing solutions that suit a variety of needs. With powerful engines, ease of use, and a focus on user comfort, these models are designed to help users achieve a clean and even cut, regardless of the lawn's size or condition.