Assembly

•Turn off the blades when not cutting. Before leaving the machine, turn off the blades and stop the engine.

•Watch for traffic when operating near or crossing roadways.

•Do not operate the cutter if it has been dropped or damaged in any manner or if the mower vibrates excessively. Excessive vibration is an indication of damage. Repair cutter as necessary.

•Dress properly. Do not operate the cutter when barefoot or wearing open sandals. Wear only solid shoes with good traction when cutting.

•Never allow operation by untrained persons.

•Do not operate the machine while under the influence of alcohol or drugs.

•Do not operate on slopes greater than 15 degrees.

•Never tamper with safety devices. Check their proper operation regularly.

•Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. Never make adjustments or repairs with the engine running.

•Cutter blades are sharp and can cut. Wrap the blades or wear gloves, and use extra caution when servicing them. Do not operate at too fast a rate.

•Return lever to its vertical position to disengage blades.

•The braking system is applied when the blades become disengaged. It is designed to bring the blades to a quick stop (approximately 7 seconds). Each Trailcutter brake system has been tested and calibrated. For safety, the consumer should not alter the braking system.

•Disengage spark plug wire and place where it cannot make a connection.

•Refer to Figure 2 p.11. Attach hitch assembly parts to front of mower . Insert 3/8-16 X 2 ½ through plate and attach 3/8-16 nut to the bottom. Tighten nut tight until tube is clamped then back off ½ turn to allow tube to pivot.

•The L hitch can be adjusted up or down to level the deck from front to back

•Check engine oil. All engines are filled with oil at the factory. Verify oil level and

add if necessary before starting engine. (See Engine Owner’s Manual)

•Verify fuel level and add if necessary before starting engine.

•Check the battery (if so equipped). If battery is put into service after the “month & year” of the date on the battery, then it may need to be charged with a 12 volt battery charger for a minimum of 1 hour, but no more than 2 hours at a rate of 6 to 10 amps.

•Attach battery cable(s) to battery. ( if so equipped ) Red wire to positive (FIRST) and black wire to negative (SECOND).

•Reconnect spark plug wire.

•(Refer to Owner’s Manual p. 5) For proper operating procedures.

RTB134412V, RTB14544, RTB115441 specifications

The Swisher RTB14544, RTB115441, and RTB134412V are robust brush cutters designed to meet the needs of landscaping professionals and homeowners seeking high-performance tools for demanding tasks. Each model offers a unique set of features and technologies, making them suitable for different cutting applications.

The Swisher RTB14544 is known for its powerful 14.5 HP engine, providing ample torque to handle dense brush and overgrowth with ease. One of its standout features is the 44-inch cutting deck, which allows users to cover large areas quickly. The heavy-duty steel construction ensures durability, while its commercial-grade transmission offers reliable performance. A key technology found in the RTB14544 is the adjustable cutting height, which enables users to customize the cutting length according to varying vegetation. Additionally, the model is equipped with a maintenance-free battery and an easy-starting system for user convenience.

Next, the Swisher RTB115441 comes with a slightly different design yet retains the features and performance that the Swisher brand is known for. This model also boasts a 11.5 HP engine, which is perfect for residential users. The 44-inch cutting deck provides a balance between maneuverability and cutting efficiency. The RTB115441 is designed with user comfort in mind, featuring an ergonomic seat and controls that reduce operator fatigue during extended use. The integrated quick-release system allows for easy blade changes, enhancing productivity. The model is also compatible with various attachments, making it a versatile tool for multiple landscaping projects.

Lastly, the Swisher RTB134412V combines power and precision with its 13 HP engine and a versatile 34-inch cutting deck. This model is particularly suited for tackling smaller, tighter spaces in lawns or gardens without sacrificing performance. Its lightweight design makes it easy to maneuver around obstacles. Similar to the other models, the RTB134412V features adjustable cutting heights, ensuring a professional-quality finish. The optional side discharge feature helps when tackling thicker vegetation, allowing for efficient cutting and dispersing of clippings.

In summary, the Swisher RTB14544, RTB115441, and RTB134412V brush cutters offer innovative technologies tailored for various landscaping needs. With powerful engines, sturdy designs, and user-friendly features, these models stand out in the market, providing excellent reliability and performance for both professionals and homeowners alike. Whether you need a robust machine for heavy-duty tasks or a more compact option for residential use, Swisher’s lineup delivers on quality and effectiveness.