Swisher RTB115441, RTB14544, RTB134412V owner manual Engaging Blades

Page 6

ENGAGING BLADES

Note: Do not attempt to start the unit with the T-handle console in the ‘’ ENGAGED ’’ position.

Engage blades by pulling down the T-handle lever into the horizontal position.

Return lever to the vertical position to disengage blades. See detail on page 14 figure – 8

The braking system is applied when the blades become disengaged. It is designed to bring the blades

to a quick stop ( approximately 7 seconds. ) Each TrailCutter brake system has been tested for safety , the consumer should not alter any part of the brake system.

BREAKING IN YOUR CUTTER

Set the vehicle parking brake and chock the wheels to prevent accidental rolling.

While the engine is running, slowly, engage blade control.

In a safe environment, (i.e. no children or pets) allow blades to rotate and engine to idle for 5 minutes, breaking in the belt for a longer life.

Stop cutter.

STARTING THE ENGINE

See engine manufacturer’s recommendations for the type and amount of oil and fuel used.

Make sure the tow vehicle parking brake is set, mower is level, and blades are disengaged. Engine must be level to accurately check and fill oil. Do not overfill.

Check spark plug wire, oil, and fuel.

Check all electrical connections for build-up of debris.

Set engine idle to “CHOKE” position.

Turn key to the “RUN” position.

Pull rope with a single fluid motion.

(12V models only) Turn key to the “RUN” position, then to the “START” position.

Set engine idle at maximum RPM for best performance.

Allow engine to run a few moments before engaging blades.

CAUTION: SHUT OFF THE CUTTER ENGINE AND REMOVE SPARK

PLUG WIRE FROM SPARK PLUG BEFORE MAKING ANY

ADJUSTMENTS TO THE CUTTER.

FRONT TO BACK ADJUSTMENT

For best cutting results, the cutter deck should be parallel to the ground. To check parallel adjustment, measure the distance from the bottom edge of the deck in both the front and rear of the deck. This adjustment is best done while the tow vehicle and Trailcutter are connected.

Remove bolt and nut from the “L” hitch (10388TK ).

Raise or lower hitch section to obtain proper front to back adjustment.

Connect bolt and nut in “L” hitch securely, Then rotate nut counter- clockwise ½ turn,“L” hitch should pivot freely.Bolt must go completely through nut ( but do not over

tighten). See figure – 2, page 11

6

Image 6
Contents Rough CUT Trail Cutter Limited Warranty Table of ContentsSafety Precautions Assembly Operating Your Trailcutter Intended USEEngaging Blades Cutter Height Adjustment Cutter Maintenance General RecommendationsGeneral Troubleshooting Unit is not cutting levelSafety and Operational Decals OD36-Deflector DecalFront Skirt Assembly Hitch BAR AssemblyBlade Driver Assembly Item # DescriptionEngine Pulley Assembly Belt Engage ConfigurationConsole Assembly KSMRepair Parts 44ROUGH CUT Trailcutter

RTB134412V, RTB14544, RTB115441 specifications

The Swisher RTB14544, RTB115441, and RTB134412V are robust brush cutters designed to meet the needs of landscaping professionals and homeowners seeking high-performance tools for demanding tasks. Each model offers a unique set of features and technologies, making them suitable for different cutting applications.

The Swisher RTB14544 is known for its powerful 14.5 HP engine, providing ample torque to handle dense brush and overgrowth with ease. One of its standout features is the 44-inch cutting deck, which allows users to cover large areas quickly. The heavy-duty steel construction ensures durability, while its commercial-grade transmission offers reliable performance. A key technology found in the RTB14544 is the adjustable cutting height, which enables users to customize the cutting length according to varying vegetation. Additionally, the model is equipped with a maintenance-free battery and an easy-starting system for user convenience.

Next, the Swisher RTB115441 comes with a slightly different design yet retains the features and performance that the Swisher brand is known for. This model also boasts a 11.5 HP engine, which is perfect for residential users. The 44-inch cutting deck provides a balance between maneuverability and cutting efficiency. The RTB115441 is designed with user comfort in mind, featuring an ergonomic seat and controls that reduce operator fatigue during extended use. The integrated quick-release system allows for easy blade changes, enhancing productivity. The model is also compatible with various attachments, making it a versatile tool for multiple landscaping projects.

Lastly, the Swisher RTB134412V combines power and precision with its 13 HP engine and a versatile 34-inch cutting deck. This model is particularly suited for tackling smaller, tighter spaces in lawns or gardens without sacrificing performance. Its lightweight design makes it easy to maneuver around obstacles. Similar to the other models, the RTB134412V features adjustable cutting heights, ensuring a professional-quality finish. The optional side discharge feature helps when tackling thicker vegetation, allowing for efficient cutting and dispersing of clippings.

In summary, the Swisher RTB14544, RTB115441, and RTB134412V brush cutters offer innovative technologies tailored for various landscaping needs. With powerful engines, sturdy designs, and user-friendly features, these models stand out in the market, providing excellent reliability and performance for both professionals and homeowners alike. Whether you need a robust machine for heavy-duty tasks or a more compact option for residential use, Swisher’s lineup delivers on quality and effectiveness.