Pre-Delivery Service of Mower by Dealer

WARNING

If you are not completely familiar with the Safety Instruction Manual read it now before proceeding with the Pre-Delivery Service of the mower. Only your authorized Wright dealer should perform the Pre- Delivery Service of the mower.

The Wright Stander ZK is shipped completely assembled and has been adjusted and tested at the factory. However, due to jostling during the shipping process and the delivery time lapse the following items need to be repeated again before starting the mower. After you have uncrated the mower, follow these procedures in the order indicated:

•Inspect the mower for any damage, unusual conditions or missing parts.

•Inspect the mower for all of its decals, especially the warning decals. There should be one blade warning decal on each side of the deck, the “shield missing” under the blade belt covers, and the dash decal.

•Check (and fill if necessary) engine oil level according to the engine manufacturer’s recommendation.

•Check (and fill if necessary) hydraulic fluid level. Use fully SYNTHETIC oil: Mobil-1 15W-50 (see Hydro Check/Fill section of this manual).

•Check rear tire pressure - 18 to 22 psi. is recommended. It should be even on both sides. Use the higher pressures for heavier operators. Front Casters are equipped with non-pneumatic tires and do not require any air. Lowering tire pressure will affect deck pitch. Always check pitch any time tire pressure is set below recommended pressures.

•Check the battery to see that the cables are tight and connected properly. The battery is 12 volts and is a maintenance-free battery. Only charge the battery if it will not start the mower properly.

•Check the cutter deck for proper adjustment. The deck should be approximately ¼” lower in the front than in the rear and the deck should be level side-to-side. If the deck is not adjusted properly, please adjust at this time. See Deck adjustments section of this manual for further instructions.

•Lubricate all moving parts (see Maintenance Items section of this manual).

•Add regular unleaded gasoline to fuel tank. Turn fuel valve, located on the right side of upright to the “ON” position. The down position controls the right tank, the up position controls the left tank. Center position is “OFF”. (Use a minimum of 87 octane gasoline) (You may use gasoline containing up to 10% ethanol and gasoline containing up to 5% of methanol.)

•Check brake safety interlock.

oTry starting the engine with the parking brake released. (Engine should not start. If engine starts,

service the parking brake locking system)

oWith hand controls in the middle or neutral position, apply the parking brake.

•Start the engine according to the engine manufacturer’s recommendation. Let the engine run at low - mid RPM for several minutes to ensure the engine oil reaches all of the engine parts and gets the hydraulic fluid circulating through the pumps, etc.

o Check if the parking brake locking system prevents the units from being driven while engaged. If not, service the parking brake locking system.

•Release the parking brake. Next, move the hand control levers, one at a time, to make the wheels move in forward and backward rotation.

4213, 4214, 4211, 4212, 4216 specifications

Wright Manufacturing is renowned for its commitment to producing top-tier commercial mowers, and the Wright Manufacturing 4219, 4214, 4212, 4216, and 4215 models exemplify this excellence. These mowers are designed for professionals who require robust, efficient, and dependable performance.

The 4219 model is distinguished by its powerful engine options and a cutting width that offers high productivity. This mower features a unique weight distribution system, ensuring stability and maneuverability even on hilly terrains. Its cutting system is engineered to provide a clean cut, promoting healthy grass growth, and its heavy-duty construction ensures long-lasting durability.

Moving on to the 4214 model, this mower is geared towards those who seek a balance between performance and compactness. With a slightly smaller frame, the 4214 is perfect for navigating tighter spaces without sacrificing power. The mower utilizes advanced technology, including a patented belt drive system that enhances efficiency while reducing maintenance costs. Its ergonomic design allows operators to work longer with reduced fatigue.

The 4212 model stands out for its simplicity and ease of use. It is ideal for smaller commercial operations or residential users needing professional-quality performance. The mower is equipped with intuitive controls, making it accessible to operators of all skill levels. Despite its smaller size, the 4212 does not compromise on cutting quality, delivering an exceptional finish on any lawn.

The 4216 combines innovation with robust engineering, featuring a wider cutting deck that optimizes productivity. It is built with fuel efficiency in mind, which helps reduce operational costs for commercial users. Additionally, the mower's durable chassis ensures stability during operation, and its advanced anti-scalping features guarantee a superior cut even on uneven surfaces.

Lastly, the 4215 model is engineered for versatility and adaptability. It integrates cutting-edge technology with user-friendly controls, making it suitable for various mowing conditions. One of its notable features is the customizable height adjustment system, allowing operators to achieve the perfect cut for different grass types and terrains.

Overall, Wright Manufacturing's 4219, 4214, 4212, 4216, and 4215 models offer a blend of power, efficiency, and versatility. Each model is tailored to meet the diverse needs of professionals in the landscaping and lawn care industries, showcasing Wright Manufacturing's dedication to quality and innovation in lawn maintenance solutions.