Wright Manufacturing 4214, 4219, 4215, 4216, 4212 Mower is now ready for delivery to your customer

Page 5

•Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable to possible thrown objects from under the mower. No one should be near the mower deck or in its line of discharge at this or at any time. The discharge chute deflector should be in the down position.

•Move the engine throttle control to ¾ RPM speed setting.

•Turn on the blade clutch switch. Run blades for approximately one minute. Next, engage and disengage the blades a few times about 10 seconds apart. If the blades do not start and stop in a few seconds each time, service the blade brake system.

•With the blades on, disengage the OPC switch to test the Operator Presence Control switch (OPC). A time delay has been added to the OPC system. The engine should die and the blades should stop with-in 6-9 seconds after stepping off of the foot platform. If not, service the OPC system.

•Disengage the blades.

•Drive the mower around on a level parking lot. ZK’s are being set at the factory at the 12 MPH setting of the Speed/Sensitivity Adjustment. (See further in this manual for information on Speed/Sensitivity Adjustment)(Ground speeds are estimates and could vary from machine to machine plus or minus 1.0 – 0.5 mph.) Be sure that the mower drives in a straight line when both hand controls are held to the full speed position which is up against the stationary control bar. If not, see further in this manual for information on tracking adjustment.

•As you drive the mower, listen for any unusual noises and test for irregular operation and adjust or service as necessary. Next, go over the safety information and operating procedures in this manual with the customer. Instruct the customer in proper operation and observe the customer during their initial operation on a level parking lot. Make sure the customer is familiar and comfortable with the basic operation and use of the mower.

•Dealer:

Register the mower online within 14 days from the date of retail purchase.

(If unable to use the online registration process, contact your Distributor to register for you)

 Registering the product indicates you have successfully completed the pre-delivery service checklist.

 The limited warranty is considered invalid unless the unit is registered and the above steps are taken.

 Remember, the purchaser is both your customer and our customer and his/her satisfaction is very important. Thank you for supporting our products.

• The mower is now ready for delivery to your customer

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Revised 7/2011 Safety Alert Table of Contents Pre-Delivery Service of Mower by Dealer Mower is now ready for delivery to your customer User Experience and Qualifications Owner/User NoticeInitial Operating Safety Guidelines Scheduled Mower Maintenance SafetyUser Clothing Work Area Conditions and InspectionZero-Radius Turn Operation Operation In Forward DirectionOperation In Reverse Operation on Slopes Fuel SafetyHydraulic Safety Replacement Parts Using a Spark ArresterHow to drive the mower How to start the mowerProposition 65 Warning Starting the engineHow to Drive the Mower Over a Curb How to Stop and Park the MowerHow to Use the Mower on Varying Terrain How to Adjust NeutralTracking in the 10 & 12 MPH Setting How to Perform the Tracking AdjustmentTracking in the 13.5 MPH Setting Test/Use the Blade Clutch/Brake SwitchTire Maintenance and Pressure How to Test the Operator Presence Control OPC SwitchDeck Adjustments Belt Tension AdjustmentBattery Service How to Move the Mower if the Engine Won’t StartCleaning the Mower Bleeding Air from the Hydraulic SystemTorque Specifications Page Maintenance Record Wright MANUFACTURING, INC. Power Equipment Limited Warranty MANUFACTURER’S Warranty Coverage Warranted Parts Page Page Frederick, MD

4213, 4214, 4211, 4212, 4216 specifications

Wright Manufacturing is renowned for its commitment to producing top-tier commercial mowers, and the Wright Manufacturing 4219, 4214, 4212, 4216, and 4215 models exemplify this excellence. These mowers are designed for professionals who require robust, efficient, and dependable performance.

The 4219 model is distinguished by its powerful engine options and a cutting width that offers high productivity. This mower features a unique weight distribution system, ensuring stability and maneuverability even on hilly terrains. Its cutting system is engineered to provide a clean cut, promoting healthy grass growth, and its heavy-duty construction ensures long-lasting durability.

Moving on to the 4214 model, this mower is geared towards those who seek a balance between performance and compactness. With a slightly smaller frame, the 4214 is perfect for navigating tighter spaces without sacrificing power. The mower utilizes advanced technology, including a patented belt drive system that enhances efficiency while reducing maintenance costs. Its ergonomic design allows operators to work longer with reduced fatigue.

The 4212 model stands out for its simplicity and ease of use. It is ideal for smaller commercial operations or residential users needing professional-quality performance. The mower is equipped with intuitive controls, making it accessible to operators of all skill levels. Despite its smaller size, the 4212 does not compromise on cutting quality, delivering an exceptional finish on any lawn.

The 4216 combines innovation with robust engineering, featuring a wider cutting deck that optimizes productivity. It is built with fuel efficiency in mind, which helps reduce operational costs for commercial users. Additionally, the mower's durable chassis ensures stability during operation, and its advanced anti-scalping features guarantee a superior cut even on uneven surfaces.

Lastly, the 4215 model is engineered for versatility and adaptability. It integrates cutting-edge technology with user-friendly controls, making it suitable for various mowing conditions. One of its notable features is the customizable height adjustment system, allowing operators to achieve the perfect cut for different grass types and terrains.

Overall, Wright Manufacturing's 4219, 4214, 4212, 4216, and 4215 models offer a blend of power, efficiency, and versatility. Each model is tailored to meet the diverse needs of professionals in the landscaping and lawn care industries, showcasing Wright Manufacturing's dedication to quality and innovation in lawn maintenance solutions.
Top Page Image Contents