Wright Manufacturing 14SH654 owner manual Seat Adjustments, Lubrication

Page 16

Seat Adjustments

The Sport X seat is equipped with the ability to adjust the seat up and down as well as lock the seat in the down position to avoid seat bounce while standing. (Figure 1)

B

A

Figure 1

Height Adjustment:

•Loosen lower seat mounting hardware,

•Removing upper bolts. (Fig. 1A)

•Raise or lower seat to desired setting and re-install the upper bolts in the corresponding hole.

•Tighten all hardware.

Seat Lock:

•Loosen T-Knob (Fig. 1B)

•Slide up to top of slot and lock T-Knob to lock seat in position.

•To fold seat forward, loosen T-Knob and slide to bottom of slot.

Hydro Oil Tank Check/Fill

Checking oil

•Ensure mower is on a level surface.

•Remove hex socket plug from oil level port on the front of the tank. Location is behind the engine attached to the front of the upright assembly.

•Hydro oil should be at the bottom of the threads. Filling oil

•Remove hex socket plug.

•Using a funnel, fill tank through oil level port until oil reaches bottom threads of the port.

15

Fill Here

Lubrication

Grease with No. 2 general purpose lithium base or molybdenum base grease.

•Set parking brake, stop the engine and remove the key.

•Clean grease fittings with a rag.

•Connect grease gun to fitting and pump until grease begins to ooze out from the bearings.

•Wipe off excess grease.

•Do not use spray lube of any kind on choke and/or throttle cables.

Service intervals: First 8 hours Every 25 hours

Also see Maintenance chart

How to Move the Mower if the Engine Won’t Start

Rotate both of the hydro bypass valves on the side of each hydraulic pump about ½ turn counterclockwise. It is important not to over tighten these. Damage may occur to the pump if this valve is over tightened.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Revised 7/2011 Safety Alert Table of Contents PRE-DELIVERY Service of Mower by Dealer Mower is now ready for delivery to your customer General Safety Instructions IntroductionOwner/User Notice User QualificationsRegular Mower Safety Maintenance User ClothingInspect Mower Before Each Use Work Area Conditions & InspectionOperation In Forward Direction Initial Operating Safety GuidelinesOperation In Reverse Zero-Radius Turn Operation Fuel SafetyOperation on Slopes Hydraulic Safety Replacement PartsHow to start the mower How to drive the mowerInspect Mower Before Each Use Starting the engineHow to Stop and Park the Mower How to Adjust NeutralDriving the Mower Over a Curb Mowing on Varying TerrainHow to Perform the Tracking Adjustment Changing the Speed/Sensitivity AdjustmentHow to Test/Use the Blade Clutch/Brake Switch How to Test the Operator Presence Control OPC Switch Service and AdjustmentsReplacing the Cutter Deck Belt Deck Lift Assist AdjustmentReplacing Drive Belt How to Move the Mower if the Engine Won’t Start Seat AdjustmentsLubrication Battery Service Bleeding Air from the Hydraulic SystemTorque Specifications Spindle Set Up / Blade OptionsBLADE, Mulching Sport X Consumables / Maintenance Items Maintenance Interval Chart Maintenance Record Decals Wright MANUFACTURING, INC. Power Equipment Limited Warranty Recommended Mowing Heights Mowing TipsMANUFACTURER’S Warranty Coverage Warranted Parts 4600X Wedgewood Blvd Frederick, MD

14SH654 specifications

Wright Manufacturing is renowned for producing high-quality lawn care equipment, and among its impressive range of products is the Wright Manufacturing 14SH654 mower. This mower is specifically designed for efficiency, durability, and ease of use, making it an ideal choice for both residential and commercial landscaping needs.

One of the standout features of the 14SH654 is its powerful engine. It is equipped with a fuel-efficient engine that provides ample power for tackling even the toughest mowing tasks. This engine is designed to deliver consistent performance, ensuring that users can complete their mowing jobs quickly and effectively.

The mower’s cutting deck is another remarkable characteristic. The 14SH654 features a durable steel cutting deck that ensures a precise cut every time. The deck size is optimized for maneuverability without sacrificing cutting width, allowing users to navigate intricate landscapes and tight spaces with ease. Additionally, the deck's design promotes superior airflow, resulting in cleaner cuts and better grass clipping dispersal.

Wright Manufacturing's commitment to user comfort is reflected in the design of the 14SH654. The mower comes with an ergonomically designed handle that reduces vibration, making it more comfortable for extended use. The adjustable handle height accommodates users of various heights, ensuring an ergonomic mowing experience every time.

Technologically, the 14SH654 includes features that enhance its usability. For instance, the mower is equipped with a reliable starting system, minimizing start-up frustrations. The robust wheel system enables smooth navigation across various terrain types, from flat lawns to hilly landscapes. Its reliable traction helps prevent slippage, providing stability while mowing.

Moreover, the 14SH654 has a built-in mulching system, which allows for efficient grass management. This feature returns finely shredded grass clippings back onto the lawn, acting as a natural fertilizer that promotes healthier grass growth. Users can also choose to bag the clippings for a tidy finish, highlighting the mower's versatility.

In summary, the Wright Manufacturing 14SH654 mower stands out due to its powerful engine, durable cutting deck, user-friendly design, and advanced technological features. It encapsulates the essence of high-performance mowing equipment, designed to meet the diverse needs of users while delivering superior results. Whether for home maintenance or professional landscaping, the 14SH654 is a reliable choice for anyone looking to enhance their mowing experience.
Top Page Image Contents