Yard Machines 410, 420 manual HOW to USE Your Tiller, Use This

Page 10

SECTION 8: HOW TO USE YOUR TILLER

WARNING: When operating the tiller for the first time, use the depth stake setting that gives 1 inch of tilling depth (second hole from the top). Refer to Figure 14.

Tilling depth is controlled by the depth stake which can be adjusted to five different settings. See Figure

14.Adjust the side shields as shown in Figure 15, as you adjust the depth stake. Be certain spark plug wire is disconnected and grounded against the engine.

1.When using the tiller for the first time, use the second adjustment hole from the top (1" of tilling depth). See Figure 14.

Use This

 

 

Position

 

 

First Time

Transport

 

 

Position

 

1"

Hairpin

 

3"

Clevis

Clip

5"

 

Pin

 

7"

 

 

 

Figure 14

3.When tilling loose soil, depth stake may be raised to its highest position (use bottom adjustment hole) to give the deepest tilling depth. Raise the side shields to their highest position.

4.To transport tiller, lower the depth stake (use top adjustment hole).

To adjust the depth stake, remove the clevis pin and hairpin clip. See Figure 14. Move the depth stake to the desired setting. Secure with the clevis pin and hairpin clip.

To adjust the side shields, remove the wing nuts. See Figure 15. Move the side shield to the desired position. Replace the wing nuts. Tighten securely.

To operate the tiller:

1.Select the depth stake setting.

2.Start engine as instructed on page 9.

3.Move gear selection handle to one of the forward modes or reverse.

WARNING: Do not move the gear selection handle with the wheels or tines engaged. Make certain the unit is stopped completely before changing the gear selection.

A partial engagement may be necessary when engaging tines. Refer to “Controls” section on page 8.

4.Squeeze the clutch handle against the handle to engage the wheels and tines.

NOTE: Make certain the gear selection indicator is correctly positioned before engaging the clutch handle. If it is between gears, the engine will stall.

Use This

Side

Hole for

Shields

Lowest (Shallowest)

 

Position

 

Use This Hole for

Highest (Deepest)

Position

Figure 15

2.When breaking up sod and for shallow cultivation, use the setting which gives 1" of tilling depth (second hole from the top). Place the side shields in their lowest position. For further depth, raise the depth stake and side shields and make one or two more passes over the area.

To transport tiller, do not engage the tines. Select the wheel drive only.

WARNING: Do not push down on the handles so that the wheels are lifted off the ground while using the tine drive, or the tiller could move backward and cause personal injury.

For best results, it is recommended the garden be tilled twice (lengthwise, then widthwise) to pulverize the soil.

10

Image 10
Contents OPERATOR’S Manual Important Safe Operation Practices General OperationService ChildrenUnpacking Finding Your Model NumberCalling Customer Support To Remove Unit from CartonAttaching the Depth Stake Assembly Assembly InstructionsTools Required for Assembly Loose Parts in CartonAttaching the Handle Adjustment ROD Attaching the Gear Shift RODAttaching the Clutch Cable Final Clutch AdjustmentHandle Adjustment Lock Cable Clip Flange Lock Nut Tire PressureThrottle Control ControlsGear Selection Handle Depth StakeTo Start Engine OperationBefore Starting To Stop EngineHOW to USE Your Tiller Use ThisMaintenance AdjustmentsLubrication Tires Belt ReplacementOFF-SEASON Storage EngineTrouble Shooting Guide Trouble Possible Causes Corrective ActionModels Part Description Models 410, 415 Description Model Description MANUFACTURER’S Limited Warranty for Other Warranties
Related manuals
Manual 20 pages 1.3 Kb

420, 410 specifications

The Yard Machines 410 through 429, 21" Rear Discharge Push Mower is a robust and versatile lawn care solution designed for homeowners who prioritize efficiency and convenience. This highly regarded mower stands out in the market thanks to its state-of-the-art features and technology that enhance mowing performance.

One of the main features of the Yard Machines push mower is its 21-inch cutting deck, specifically designed for optimal maneuverability and efficiency in both small and medium-sized yards. The rear discharge functionality allows for a clean and controlled cut, ensuring grass clippings are evenly distributed behind the mower, which helps to improve the lawn's overall health by returning nutrients to the soil.

Equipped with a powerful 140cc engine, the Yard Machines mower provides reliable performance for tackling various grass types and yard conditions. The engine's design prioritizes fuel efficiency, allowing homeowners to mow larger areas without frequently stopping for refueling. The easy-start mechanism enhances user experience, ensuring that the mower starts quickly with minimal hassle.

Another key characteristic is the adjustable cutting height feature, which offers six different settings, ranging from 1.25 inches to 3.75 inches. This versatility allows users to customize their mowing experience based on the specific needs of their lawn and prevailing weather conditions. Whether you need a close cut for a formal look or a higher cut for more foliage, this mower can accommodate your preferences.

The Yard Machines 410 through 429 models also excel in user comfort and ease of use. The lightweight design ensures that even less experienced operators can maneuver the mower effortlessly. Additionally, the ergonomic handlebar provides a comfortable grip and helps to reduce fatigue during extended mowing sessions.

Durability is another standout aspect of this mower, as it features a sturdy steel deck that can withstand the rigors of regular use, ensuring longevity and reliability. Furthermore, the mower's compact size allows for easy storage, even in tight spaces.

Overall, the Yard Machines 410 through 429, 21" Rear Discharge Push Mower is an excellent choice for homeowners seeking a reliable, efficient, and user-friendly option for maintaining their lawns. With its combination of powerful performance, adjustable features, and durability, this mower is designed to make lawn care an effortless and enjoyable task.