Yard Machines 420, 410 Assembly Instructions, Tools Required for Assembly, Loose Parts in Carton

Page 5

SECTION 5: ASSEMBLY INSTRUCTIONS

This instruction manual covers several different model tillers. Follow only those instructions which pertain to your unit.

NOTE: Left and right is determined from the operator’s position, standing behind the tiller.

TOOLS REQUIRED FOR ASSEMBLY

(2)1/2" Wrenches*

(1)9/16" Wrench*

(1)Pair of Pliers

*Two adjustable wrenches may be used.

LOOSE PARTS IN CARTON

(1) Depth Stake

(1)Handle Assembly

(1)Shift Rod

(1)Handle Adjustment Rod (Model 420 Only)

1.Tip the tiller forward so it rests on front counterweight.

2.Unthread the “T” knob from the top of the depth stake, and remove the flat washer and hex bolt. Remove the hairpin clip from the clevis pin. See Figure 3.

3.Raise the tine shield hinge flap assembly. Insert the depth stake assembly in the slot (under the tine shield) and up through the tine shield assembly as shown in Figure 3.

4.Insert clevis pin through the tine shield and depth stake assemblies. Secure with hairpin clip.

5.Insert hex bolt into the top hole of the depth stake assembly. Place flat washer on the hex bolt and thread “T” knob onto the hex bolt. See Figure 3. Tighten securely.

6.Tip the tiller back down so it rests on the tines.

NOTE: All hardware needed for assembly is attached to the loose parts or the tiller.

ATTACHING THE DEPTH STAKE ASSEMBLY

T-Knob, Flat Washer, Hex Bolt

Tine Shield

Hinge Flap

Clevis Pin

Hairpin Clip

Depth Stake

Figure 3

Attaching the Handle Assembly

1.Remove the Handle Adjustment Lock, Flange Nut Retainer Bracket, Shoulder Bolt and Lock Nut from the Pivot Bracket.

2.Place the handle assembly in position in the handle pivot bracket lining the upper holes in the handle with the slots in the pivot bracket. See Figure 4.

Flange Nut Retainer Bracket

 

Shoulder Bolt

Handle Adjustment

Lock Nut

 

Lock

 

Flange Nut

 

Pivot Bracket

Figure 4

3.Lift up the handle assembly and align the bottom holes in the handle assembly with the holes in the pivot bracket. Insert hex bolt (with Hex nut retainer attached through the round hole). The head of hex bolt and retainer bracket should be to the right hand side of the unit. See Figure 5.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OPERATOR’S Manual General Operation Important Safe Operation PracticesChildren ServiceCalling Customer Support Finding Your Model NumberUnpacking To Remove Unit from CartonTools Required for Assembly Assembly InstructionsAttaching the Depth Stake Assembly Loose Parts in CartonAttaching the Gear Shift ROD Attaching the Handle Adjustment RODHandle Adjustment Lock Cable Clip Flange Lock Nut Final Clutch AdjustmentAttaching the Clutch Cable Tire PressureGear Selection Handle ControlsThrottle Control Depth StakeBefore Starting OperationTo Start Engine To Stop EngineUse This HOW to USE Your TillerLubrication AdjustmentsMaintenance OFF-SEASON Storage Belt ReplacementTires EngineTrouble Possible Causes Corrective Action Trouble Shooting GuideModels Part Description Models 410, 415 Description Model Description Other Warranties MANUFACTURER’S Limited Warranty for
Related manuals
Manual 20 pages 1.3 Kb

420, 410 specifications

The Yard Machines 410 through 429, 21" Rear Discharge Push Mower is a robust and versatile lawn care solution designed for homeowners who prioritize efficiency and convenience. This highly regarded mower stands out in the market thanks to its state-of-the-art features and technology that enhance mowing performance.

One of the main features of the Yard Machines push mower is its 21-inch cutting deck, specifically designed for optimal maneuverability and efficiency in both small and medium-sized yards. The rear discharge functionality allows for a clean and controlled cut, ensuring grass clippings are evenly distributed behind the mower, which helps to improve the lawn's overall health by returning nutrients to the soil.

Equipped with a powerful 140cc engine, the Yard Machines mower provides reliable performance for tackling various grass types and yard conditions. The engine's design prioritizes fuel efficiency, allowing homeowners to mow larger areas without frequently stopping for refueling. The easy-start mechanism enhances user experience, ensuring that the mower starts quickly with minimal hassle.

Another key characteristic is the adjustable cutting height feature, which offers six different settings, ranging from 1.25 inches to 3.75 inches. This versatility allows users to customize their mowing experience based on the specific needs of their lawn and prevailing weather conditions. Whether you need a close cut for a formal look or a higher cut for more foliage, this mower can accommodate your preferences.

The Yard Machines 410 through 429 models also excel in user comfort and ease of use. The lightweight design ensures that even less experienced operators can maneuver the mower effortlessly. Additionally, the ergonomic handlebar provides a comfortable grip and helps to reduce fatigue during extended mowing sessions.

Durability is another standout aspect of this mower, as it features a sturdy steel deck that can withstand the rigors of regular use, ensuring longevity and reliability. Furthermore, the mower's compact size allows for easy storage, even in tight spaces.

Overall, the Yard Machines 410 through 429, 21" Rear Discharge Push Mower is an excellent choice for homeowners seeking a reliable, efficient, and user-friendly option for maintaining their lawns. With its combination of powerful performance, adjustable features, and durability, this mower is designed to make lawn care an effortless and enjoyable task.
Top Page Image Contents