Finding Your Model Number | Yard Machines 340 Thru 390 guide

SECTION 2: FINDING YOUR MODEL NUMBER

This Operator’s Manual is an important part of your new tiller. It will help you assemble, prepare and maintain your tiller. Please read and understand what it says.

Before you start to prepare your tiller for its first use, please locate the model plate and copy the information from it in this Operators Manual. The information on the model plate is very important if you need help from your dealer or the MTD customer support department.

•Every tiller has a model plate. You can locate it by standing in the operating position behind the unit and looking down at the frame on the right side.

•The model plate will look like Figure 2.

This is where your model number will be.

XXX-X-XXX-X-XXX XXXXXXXXXXX

This is where your serial number will be.

Copy the model number here:

MTD PRODUCTS INC Copy the serial number here:

CLEVELAND , OHIO 44136

Figure 2

SECTION 3: CALLING CUSTOMER SUPPORT

If you are having difficulty assembling this product or if you have any question regarding the controls, operation or maintenance of this unit, please call the Customer Support Department. You can reach them by calling:

1-800-800-7310

Before you call, make sure that you have your model and serial numbers ready. By having the model and serial numbers ready, you help the Customer Support Representative give you faster service. To find your unit’s model and serial number, see SECTION 2: FINDING YOUR MODEL NUMBER.

SECTION 4: UNPACKING

INSTRUCTIONS

1.Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

2.Remove all loose parts included with unit.

3.Cut along dotted lines and lay carton down flat.

4.Remove packing material.

5.Roll or slide unit out of carton. Check carton thoroughly for loose parts.

6.Extend control cable(s) to the rear of the tiller and lay them on the floor. Be careful not to bend or kink control cable(s).

All hardware required for assembly has been placed in position on the tiller.

SECTION 5: ASSEMBLY

INSTRUCTIONS

IMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel and engine oil recommendations.

NOTE: Left and right is determined from the operator's position, standing behind the tiller.

TOOLS REQUIRED FOR ASSEMBLY

(1)-1/2" Wrench or Socket*

(1)-Pair of Pliers

(1)-3/8" Wrench*

*An adjustable wrench may be used.

This owner's guide covers three different model tillers. Models 340 and 345 have forward tine drive only. Model 390 has both forward and reverse tine drive. Follow only the instructions which pertain to your model tiller. See the model plate on your tiller for the correct model number.

340 Thru 390 specifications

Yard Machines 340 Thru 390 series represents a versatile range of outdoor power equipment designed for home and garden enthusiasts. These models are engineered to cater to the diverse needs of users, from maintaining a well-groomed lawn to tackling more challenging landscaping tasks. With a reputation for reliability and effectiveness, the Yard Machines 340 to 390 series has become a popular choice among homeowners.

One of the standout features of the Yard Machines 340 Thru 390 series is its powerful engine options. Ranging from 340cc to 390cc, these engines deliver robust performance, ensuring efficient operation even in demanding conditions. The engines are designed to provide ample torque, making them suitable for various tasks, including mowing, mulching, and hauling.

The cutting technology in this series is particularly noteworthy. These models often come equipped with adjustable cutting heights, allowing users to customize the mowing experience based on their lawn's specific needs. This feature is essential for achieving a clean and even cut, promoting healthy grass growth. Additionally, some models include advanced mulching capabilities, which enable the recycling of grass clippings back into the lawn, enriching the soil with valuable nutrients.

Durability is another characteristic that sets the Yard Machines 340 Thru 390 series apart. Built with high-quality materials, these machines are designed to withstand the rigors of outdoor use. Whether facing rough terrain or challenging weather conditions, users can expect a machine that stands the test of time. The frames often feature a rugged construction, ensuring stability and longevity.

Ergonomics and user-friendliness are also prioritized in these models. Features such as adjustable handles and ease of operation make them accessible to a wide range of users, from novices to experienced gardeners. The intuitive control layout simplifies operation, allowing users to focus on their tasks without unnecessary distractions.

In terms of technology, the Yard Machines 340 Thru 390 series may offer electric start options, eliminating the hassle of manual starting and enhancing convenience. Furthermore, some models might include features like self-propulsion to ease maneuverability, especially on sloped or uneven terrain.

Overall, the Yard Machines 340 Thru 390 series offers a well-rounded combination of power, versatility, and user-centric design. With its commitment to quality and performance, this series is an excellent investment for anyone looking to maintain their outdoor space effectively and efficiently. Whether you’re a casual gardener or a dedicated landscaper, these machines provide the reliability and capability needed to get the job done.