To Stop Engine, HOW to USE Your Tiller | Yard Machines 340 Thru 390

Model 345

1.Attach spark plug wire to spark plug. Make certain the metal loop on the end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug.

2.Make certain all controls are in the neutral position (released). (See Figure 8).

3.Place the engine speed control in the START position.

4.Push primer two (2) or three (3) times (see Figure 9). Wait about two (2) seconds between each push.

NOTE: Primer may be needed to restart a warm engine after a short shutdown.

5.Stand at side of tiller. Grasp the starter handle and pull out slowly, until it pulls slightly harder. Let rope rewind slowly.

6.Pull rope with a rapid full arm stroke. Do not allow handle to snap back. Allow it to rewind slowly while keeping a firm hold on the starter handle.

NOTE: If engine fails to start after three (3) pulls, push primer two (2) times and pull starter rope again.

7.Repeat steps 4 and 5 until engine starts. Refer to engine manual for additional engine information.

NOTE: After starting engine and prior to using the tiller, be certain to check the clutch adjustment as described in “Checking the Clutch Adjustment” section of the Assembly Instructions.

TO STOP ENGINE

1.Move throttle control lever to STOP or OFF position.

2.Disconnect spark plug wire from spark plug and ground against the engine to prevent accidental starting while equipment is unattended.

HOW TO USE YOUR TILLER

Your tiller is a precision built machine designed for seed bed preparation, cultivating, furrowing and mulching. It is engineered to minimize the hardest work in the vegetable or flower garden, to till the soil for planting and cultivating, and to perform many other useful labor saving tasks in the garden. With the proper amount of care and maintenance, this machine will provide the owner with many years of service.

WHEEL POSITION

The tiller is shipped with the wheels adjusted such that the unit sits level. While tilling, as the tines enter the ground and the front of the tiller lowers, the wheels must be raised to level the unit, which is essential for proper engine operation. This adjustment is made by removing the clevis pin and hairpin clip from wheel yoke, raising the wheels to the desired height, and replacing the clevis pin and hairpin clip. (See Figure 10.)

Depth Stake

Wheel

Yoke

Hairpin

Clip and

Clevis Pin

Figure 10

CONTROLLING SPEED AND TILLING DEPTH

1.Wheel Yoke Adjustment: Place wheel yoke so that the wheels are forward (nearest point between wheels and tines) for shallow tilling, cultivating and transport. The forward speed will increase. Turn yoke around (farthest point between wheels and tines) for deep tilling. Forward speed will decrease. (See Figure 11.)

Wheel Yoke in this	Wheel Yoke in this
position for	position for shallow tilling,
deep tilling.	cultivating, and transport.
	Figure 11

340 Thru 390 specifications

Yard Machines 340 Thru 390 series represents a versatile range of outdoor power equipment designed for home and garden enthusiasts. These models are engineered to cater to the diverse needs of users, from maintaining a well-groomed lawn to tackling more challenging landscaping tasks. With a reputation for reliability and effectiveness, the Yard Machines 340 to 390 series has become a popular choice among homeowners.

One of the standout features of the Yard Machines 340 Thru 390 series is its powerful engine options. Ranging from 340cc to 390cc, these engines deliver robust performance, ensuring efficient operation even in demanding conditions. The engines are designed to provide ample torque, making them suitable for various tasks, including mowing, mulching, and hauling.

The cutting technology in this series is particularly noteworthy. These models often come equipped with adjustable cutting heights, allowing users to customize the mowing experience based on their lawn's specific needs. This feature is essential for achieving a clean and even cut, promoting healthy grass growth. Additionally, some models include advanced mulching capabilities, which enable the recycling of grass clippings back into the lawn, enriching the soil with valuable nutrients.

Durability is another characteristic that sets the Yard Machines 340 Thru 390 series apart. Built with high-quality materials, these machines are designed to withstand the rigors of outdoor use. Whether facing rough terrain or challenging weather conditions, users can expect a machine that stands the test of time. The frames often feature a rugged construction, ensuring stability and longevity.

Ergonomics and user-friendliness are also prioritized in these models. Features such as adjustable handles and ease of operation make them accessible to a wide range of users, from novices to experienced gardeners. The intuitive control layout simplifies operation, allowing users to focus on their tasks without unnecessary distractions.

In terms of technology, the Yard Machines 340 Thru 390 series may offer electric start options, eliminating the hassle of manual starting and enhancing convenience. Furthermore, some models might include features like self-propulsion to ease maneuverability, especially on sloped or uneven terrain.

Overall, the Yard Machines 340 Thru 390 series offers a well-rounded combination of power, versatility, and user-centric design. With its commitment to quality and performance, this series is an excellent investment for anyone looking to maintain their outdoor space effectively and efficiently. Whether you’re a casual gardener or a dedicated landscaper, these machines provide the reliability and capability needed to get the job done.