Yard Machines 340 Thru 390 manual Transporting the Tiller, Cultivating, Slow Forward

Page 9

2.Depth Stake Adjustment: The depth stake acts as a brake for the tiller and controls the depth and speed at which the machine will operate. Remove the clevis pin and hairpin clip to raise or lower depth stake. (See Figure 10.)

By increasing the depth of the depth stake, the forward speed of the machine is reduced, and the working depth is increased. (See Figure 12.) When the depth stake is raised, the working depth of the machine is reduced and the forward speed is increased. The working depth of the machine may be predetermined by setting the depth stake and wheels so that the wheels are about four inches from the ground when the tines and depth stake are resting on the ground. This setting will permit a working depth of about four inches. When presetting the working depth, the handles should be adjusted so the hand grips are a little above waist height because the tiller will be lower when the tines and depth stake penetrate the ground.

Transport

Position

Depth

Stake

Shallow

Tilling

Fast

Forward

Deep Tilling

Raised Wheel Setting

for Deep Tilling

Slow Forward

 

Figure 13

3.Handle Pressure: Further control of tilling depth and travel speed can be obtained by variation of pressure on the handles. A downward pressure on the handles will reduce the working depth and increase the forward speed. An upward pressure on the handles will increase the working depth and reduce the forward speed. The type of soil and working conditions will determine the actual setting of the depth stake and the handle pressure required.

4.Throttle Control: The throttle control lever adjusts the engine speed and stops the engine. With the throttle control lever pushed completely forward, the carburetor is in START position. Pulling the throttle control back slightly adjusts the engine speed to FAST. Pulling the throttle back further reduces the engine speed to SLOW. Pull the throttle completely back to stop the engine.

Use maximum engine speed for deep tilling. Move the throttle control to SLOW when transporting the tiller.

Figure 12

When tilling, leave approximately 8 inches of untilled soil between the first and second tilling paths, then make the third path between the first and second as shown in Figure 13. In some soils, the desired depth is obtained the first time over the garden. In other soils, the desired depth is obtained by going over the garden two or three times. In the latter case, the depth stake should be lowered before each succeeding pass over the garden. Passes should be made across the length and width of the garden alternately. Rocks which are turned up should be removed from the garden area.

TRANSPORTING THE TILLER

To transport the tiller to or from the garden, pivot the depth stake forward, out of the way. (See Figure 12.) With the throttle control in SLOW position, the unit will walk freely on top of the lawn. If the operator does not allow the tiller to move freely, the unit will start to till the surface.

CULTIVATING

For cultivating, a two to three inch depth is desirable. Setting the wheels and depth stake so that the wheels are about two inches above the ground while the tiller is resting on the tines and depth stake will allow the machine to work at cultivating depth. The throttle should be set to control forward movement to a slow walking speed.

9

Image 9
Contents OPERATOR’S Manual General Operation Important Safe Operation PracticesChildren ServiceTools Required for Assembly Assembly InstructionsFinding Your Model Number Calling Customer SupportAttaching the Tailpiece and Depth Stake Attaching the Handle AssemblyFinal Clutch Adjustment Model 340/345Tine Engagement Handle Model Operation ControlsTo Stop Engine HOW to USE Your TillerWheel Position Controlling Speed and Tilling DepthTransporting the Tiller CultivatingSlow Forward Tine Width Adjustment AdjustmentsWheel Adjustments Depth Stake AdjustmentLubrication MaintenanceOFF-SEASON Storage Trouble Possible Causes Corrective Action Trouble Shooting GuideModel Code Description Model Part Code Description Model Hex Wash Hd. TT-Tap Scr /16-18 Model Part Code Description Page Page Other Warranties MANUFACTURER’S Limited Warranty for

340 Thru 390 specifications

Yard Machines 340 Thru 390 series represents a versatile range of outdoor power equipment designed for home and garden enthusiasts. These models are engineered to cater to the diverse needs of users, from maintaining a well-groomed lawn to tackling more challenging landscaping tasks. With a reputation for reliability and effectiveness, the Yard Machines 340 to 390 series has become a popular choice among homeowners.

One of the standout features of the Yard Machines 340 Thru 390 series is its powerful engine options. Ranging from 340cc to 390cc, these engines deliver robust performance, ensuring efficient operation even in demanding conditions. The engines are designed to provide ample torque, making them suitable for various tasks, including mowing, mulching, and hauling.

The cutting technology in this series is particularly noteworthy. These models often come equipped with adjustable cutting heights, allowing users to customize the mowing experience based on their lawn's specific needs. This feature is essential for achieving a clean and even cut, promoting healthy grass growth. Additionally, some models include advanced mulching capabilities, which enable the recycling of grass clippings back into the lawn, enriching the soil with valuable nutrients.

Durability is another characteristic that sets the Yard Machines 340 Thru 390 series apart. Built with high-quality materials, these machines are designed to withstand the rigors of outdoor use. Whether facing rough terrain or challenging weather conditions, users can expect a machine that stands the test of time. The frames often feature a rugged construction, ensuring stability and longevity.

Ergonomics and user-friendliness are also prioritized in these models. Features such as adjustable handles and ease of operation make them accessible to a wide range of users, from novices to experienced gardeners. The intuitive control layout simplifies operation, allowing users to focus on their tasks without unnecessary distractions.

In terms of technology, the Yard Machines 340 Thru 390 series may offer electric start options, eliminating the hassle of manual starting and enhancing convenience. Furthermore, some models might include features like self-propulsion to ease maneuverability, especially on sloped or uneven terrain.

Overall, the Yard Machines 340 Thru 390 series offers a well-rounded combination of power, versatility, and user-centric design. With its commitment to quality and performance, this series is an excellent investment for anyone looking to maintain their outdoor space effectively and efficiently. Whether you’re a casual gardener or a dedicated landscaper, these machines provide the reliability and capability needed to get the job done.