Yazoo/Kees ZKW42171, ZKW42172, ZKW42182 important safety instructions Starting and Operation

Page 11

OPERATING INSTRUCTIONS

STARTING AND OPERATION:

1.Operator must be sitting in the seat. Engage park brake, blades off and place the motion control levers in the neutral slots. (See figure 6)

2.Adjust throttle to choke (if needed) turn key and release as soon as engine starts, and adjust 1/2 throttle.

3.Release park brake.

4.Close motion control levers.

5.Engage blades and set RPM to maximum, but not choked. NOTE: Be sure all persons are clear of area before engaging the blades. To prolong spindle bearing and belt life engage and disengage blades at approximately 1\2 throttle

Figure 6 (Right side)

MAINTENANCE

1.Engine oil level: Check daily with engine cold and on a flat surface. Remove the dipstick and wipe clean. Reinsert the dipstick all the way,but do not screw down. Remove the dipstick and check oil level. If oil level is low add oil. Use engine manufacturers specs for type of oil.

2.Pump drive belt compartment: Stop engine and remove key. Tilt seat forward and clean all debris from inside. NOTE: Cleaning may need to be done more frequently in dry conditions.

3.Mower blades: Stop engine and remove key. Inspect blades and sharpen or replace as needed. Check daily or more often if needed. The machine requires more power with dull blades and gives a poor cut. If blades get bent, replace them. Blades shouldn’t have any notches from hitting objects. The air foil on top of the blade should be sufficient to raise the grass for cutting. If blades are in good condition, sharpen at an angle of 22 to 28 degrees about 2-1/2 inches in from the tips. Note: After sharpening, check blades for proper balance, if needed correct balance to prevent excessive vibration.

4.Safety interlock system: Check daily and never operate the mower if this system is not functioning properly. The starter should crank only when the operator is in the seat, the park brake set, blades off and the motion control levers in the neutral slots. If the mower starts with any of these controls on or in an operating position, turn the mower off and repair the system immediately.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Accordance with Instructions and Common Sense Operator’s Manual forPage Trouble Shooting Table of ContentsSafety Maintenance Setup and AdjustmentsOperation Safety TrainingPreparation Equipment Setup and Adjustments Safety TransportationCutting Height Adjustments Park BrakeThrottle Lever Tension AdjustmentsReverse Spring Detent Adjustment Left side cut away view Operating Instructions Controls Adjustments Motion Control Linkage AdjustmentOperating Instructions Starting and Operation Maintenance Maintenance Problem Possible Causes Wiring Diagram Service Record

ZKW42171, ZKW42172, ZKW42182 specifications

Yazoo/Kees is a well-known manufacturer in the realm of outdoor power equipment, particularly recognized for its commercial-grade zero-turn mowers. Among its remarkable line-up, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models stand out for their exceptional performance, durability, and innovative technologies tailored for professional landscaping.

The ZKW42171 is equipped with a robust engine that delivers impressive power and efficiency. This model features a 21-horsepower engine which ensures reliable performance even in demanding mowing conditions. Its heavy-duty steel frame adds to its durability, allowing it to withstand the rigors of frequent use. Notably, the ZKW42171 is designed with a user-friendly control panel, making it easy for operators to access essential functions and manage mowing tasks effortlessly.

The ZKW42172 takes performance a step further with its enhanced power output and innovative features. It boasts a 23-horsepower engine, providing an extra boost for tackling overgrown areas or challenging terrains. This model also incorporates a refined cutting deck that delivers precision cutting and an impeccable finish, making it ideal for professional landscapers who prioritize quality. Ergonomic seating ensures comfort for extended hours of operation, allowing users to focus on the task at hand without fatigue.

Completing the series, the ZKW42182 provides the ultimate solution for those seeking an uncompromising mowing experience. With an impressive 25-horsepower engine, this model stands at the top of the range, designed for maximum productivity. The ZKW42182's innovative suspension system enhances stability and reduces vibration, promoting a smoother ride and improved control on uneven terrain.

In terms of technology, all three models feature intuitive controls that include an advanced hydrostatic transmission, allowing for smooth acceleration and precise speed adjustments. The cutting decks on these models are designed for easy height adjustment, enabling users to adapt to various grass types and conditions. Additionally, the ZKW series incorporates advanced safety features, including automatic blade shut-off when the operator leaves the seat, showcasing Yazoo/Kees' commitment to both performance and safety.

In conclusion, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models are exemplary machines tailored for professional landscapers, combining power, durability, and innovative technologies. These mowers stand ready to deliver outstanding results, making them a valuable addition to any commercial landscaping fleet.
Top Page Image Contents