Yazoo/Kees ZKW42171, ZKW42172, ZKW42182 guide

ADJUSTMENTS

MOTION CONTROL LINKAGE ADJUSTMENT:

1.This adjustment must be made with the drive wheels rotating. Raise rear of the unit and block it up so the wheels are free to rotate. CAUTION: Keep hands, feet and clothing away from rotating tires.

2.Tilt seat forward and remove the seat lanyard from seat so the seat can rotate down onto the frame. Make sure the seat is adjusted toward the rear of the unit so it clears the controls on the console.

3.Place a 2x4 board approximatly 10 to 12 inches long between the foot plate and the center of the seat to engage the seat safety switch. NOTE: You may want to cover the end of the 2x4 with a rag to protect the seat from marring.

4.Loosen the nuts directly behind each ball joint on both rods that connect the pump arm to the motion control assemblies. (See Fig 5b )

5.Start the engine. The park brake must be engaged and the motion control levers must be in the neutral slot (See figure 6 page10) to start the engine. Run engine at approximately 1/2 throttle.

6.Release park brake to allow wheels to rotate. CAUTION: Keep hands, feet and clothing away from rotating tires.

7.Begin with either side and put the motion control lever into the neutral position. Adjust the motion control linkage by rotating the double nuts on the rod in the proper direction until the wheel stops rotating (See Fig 5b ).

Move the motion control lever forward then into the neutral position and place it into the neutral slot. The wheel must be stopped completely at this point. Now do the same in reverse and release the lever. The lever should return to neutral on its own. If not see reverse spring detent adjustment section.

8.Run engine at full throttle to make sure wheels do not rotate. Readjust if any rotation occurs.

9.Repeat on the opposite side and tighten nuts against ball joints.

10.Remove the 2x4 board and make sure the seat wiring is connected to the wiring harness. WARNING: Seat must be connected for safety interlock system to properly function.

OPERATING INSTRUCTIONS

CONTROLS:

1.Be thoroughly familiar with all controls their function and how to operate them before operating the mower.

2.Motion control levers located on each side of the console control direction of movement. The left lever controls the flow of oil from the left hydro pump to the left wheel motor. The right lever controls the flow of oil from the right hydro pump to the right wheel motor.

ZKW42171, ZKW42172, ZKW42182 specifications

Yazoo/Kees is a well-known manufacturer in the realm of outdoor power equipment, particularly recognized for its commercial-grade zero-turn mowers. Among its remarkable line-up, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models stand out for their exceptional performance, durability, and innovative technologies tailored for professional landscaping.

The ZKW42171 is equipped with a robust engine that delivers impressive power and efficiency. This model features a 21-horsepower engine which ensures reliable performance even in demanding mowing conditions. Its heavy-duty steel frame adds to its durability, allowing it to withstand the rigors of frequent use. Notably, the ZKW42171 is designed with a user-friendly control panel, making it easy for operators to access essential functions and manage mowing tasks effortlessly.

The ZKW42172 takes performance a step further with its enhanced power output and innovative features. It boasts a 23-horsepower engine, providing an extra boost for tackling overgrown areas or challenging terrains. This model also incorporates a refined cutting deck that delivers precision cutting and an impeccable finish, making it ideal for professional landscapers who prioritize quality. Ergonomic seating ensures comfort for extended hours of operation, allowing users to focus on the task at hand without fatigue.

Completing the series, the ZKW42182 provides the ultimate solution for those seeking an uncompromising mowing experience. With an impressive 25-horsepower engine, this model stands at the top of the range, designed for maximum productivity. The ZKW42182's innovative suspension system enhances stability and reduces vibration, promoting a smoother ride and improved control on uneven terrain.

In terms of technology, all three models feature intuitive controls that include an advanced hydrostatic transmission, allowing for smooth acceleration and precise speed adjustments. The cutting decks on these models are designed for easy height adjustment, enabling users to adapt to various grass types and conditions. Additionally, the ZKW series incorporates advanced safety features, including automatic blade shut-off when the operator leaves the seat, showcasing Yazoo/Kees' commitment to both performance and safety.

In conclusion, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models are exemplary machines tailored for professional landscapers, combining power, durability, and innovative technologies. These mowers stand ready to deliver outstanding results, making them a valuable addition to any commercial landscaping fleet.