Yazoo/Kees ZKW42171, ZKW42172, ZKW42182 important safety instructions Maintenance

Page 12

MAINTENANCE

5.Hardware: Stop engine and remove key thoroughly inspect the entire machine for any missing or loose hardware. Check daily.

6.Air cleaner: Stop engine and remove key. Remove plastic cover and loosen wingnut on the air cleaner. Remove the foam pre-cleaner and wash or replace if needed. Inspect paper filter and replace if dirty. Check every 25 hours, daily if in very dirty conditions. Fuel efficiency, engine RPM, and available power goes down rapidly if the air filter is dirty. Prolonged effects could damage the engine.

7.Engine oil: Change oil to manufacturers specifications. Stop engine and remove key. Drain oil when engine is warm. Thoroughly clean around cap before removing. Remove oil drain cap from the right side of engine block and replace drain cap. Remove oil filter and re- place. Put a light coat of clean oil on the filter gasket before installing. Fill engine with oil using manufacturers specs, see Kawasaki owner’s manual. Start engine and idle slowly to allow the oil to recoat the interior of the engine and then inspect for leaks.

8.Hydraulic oil: Check daily. Stop engine and tilt seat forward.Thoroughly clean around cap. Remove cap. Oil level should be even with the top of the baffle in the tank. If not, add oil. NOTE: Use only 20w - 50 motor oil.

9.Tire pressure: Check every 25 to 50 hours. All four tires require 15 psi.

10.Battery: Maintance free

11.Belts: Check every 25 hours. Stop engine and remove key. Check the condition of all belts.

12. Lubrication (every 25 hours):

Front caster pivots

Front wheels

Motion Control Brackets Left and Right Pump idler pivot

Deck idler pivot

(Clean grease zerk thoroughly before greasing)

12

Image 12
Contents Operator’s Manual for Accordance with Instructions and Common SensePage Table of Contents Safety MaintenanceSetup and Adjustments Trouble ShootingSafety Training PreparationOperation Safety Transportation Equipment Setup and AdjustmentsAdjustments Park Brake Cutting HeightAdjustments Reverse Spring Detent AdjustmentThrottle Lever Tension Left side cut away view Adjustments Motion Control Linkage Adjustment Operating Instructions ControlsOperating Instructions Starting and Operation Maintenance Maintenance Problem Possible Causes Wiring Diagram Service Record

ZKW42171, ZKW42172, ZKW42182 specifications

Yazoo/Kees is a well-known manufacturer in the realm of outdoor power equipment, particularly recognized for its commercial-grade zero-turn mowers. Among its remarkable line-up, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models stand out for their exceptional performance, durability, and innovative technologies tailored for professional landscaping.

The ZKW42171 is equipped with a robust engine that delivers impressive power and efficiency. This model features a 21-horsepower engine which ensures reliable performance even in demanding mowing conditions. Its heavy-duty steel frame adds to its durability, allowing it to withstand the rigors of frequent use. Notably, the ZKW42171 is designed with a user-friendly control panel, making it easy for operators to access essential functions and manage mowing tasks effortlessly.

The ZKW42172 takes performance a step further with its enhanced power output and innovative features. It boasts a 23-horsepower engine, providing an extra boost for tackling overgrown areas or challenging terrains. This model also incorporates a refined cutting deck that delivers precision cutting and an impeccable finish, making it ideal for professional landscapers who prioritize quality. Ergonomic seating ensures comfort for extended hours of operation, allowing users to focus on the task at hand without fatigue.

Completing the series, the ZKW42182 provides the ultimate solution for those seeking an uncompromising mowing experience. With an impressive 25-horsepower engine, this model stands at the top of the range, designed for maximum productivity. The ZKW42182's innovative suspension system enhances stability and reduces vibration, promoting a smoother ride and improved control on uneven terrain.

In terms of technology, all three models feature intuitive controls that include an advanced hydrostatic transmission, allowing for smooth acceleration and precise speed adjustments. The cutting decks on these models are designed for easy height adjustment, enabling users to adapt to various grass types and conditions. Additionally, the ZKW series incorporates advanced safety features, including automatic blade shut-off when the operator leaves the seat, showcasing Yazoo/Kees' commitment to both performance and safety.

In conclusion, the Yazoo/Kees ZKW42171, ZKW42172, and ZKW42182 models are exemplary machines tailored for professional landscapers, combining power, durability, and innovative technologies. These mowers stand ready to deliver outstanding results, making them a valuable addition to any commercial landscaping fleet.