Yazoo/Kees ZKH52252, ZKH52222, ZKH61252 important safety instructions Starting and Operation

Page 12

OPERATING INSTRUCTIONS

STARTING AND OPERATION:

1.Operator must be sitting in the seat. Engage park brake, blades off and place the motion control levers in the neutral slots. (See figure 6)

2.Adjust throttle to 1/2 and set choke (if needed) turn key and release as soon as engine starts.

3.Release park brake.

4.Close motion control levers.

5.Engage blades and set RPM to maximum. NOTE: Be sure all persons are clear of area before engaging the blades. To prolong spindle bearing and belt life engage and disengage blades at approximately 1\2 throttle

Figure 6

WARNING

1.Mow only in daylight or good artificial light.

2.Do not operate the mower in wet grass if possible.

3.Mow up and down slopes. Use caution when mowing or turning on slopes. Always turn to the downhill side. Do not mow ex- cessively steep slopes ( mower may tip over and cause injury or death).

4.Use caution when backing up.

5.Stop the blades when crossing surfaces other than grass; or when traveling to and from the area to be mowed.

6.Do not operate in an unsafe manner. Use caution when making maneuvers. Sharp cornering, turning, & slopes can be unsafe

if caution isn’t used.

IMPORTANT !

Sharp, high speed, manuevers on pavement or asphalt may reduce the life of the traction drive components. Slow down when manuvering, loading or unloading especially on pavement or asphalt.

Do not alter any drive component, including pumps, motors, wheels, rims and tires.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator’s Manual for Accordance with Instructions and Common SensePage Table of Contents Safety Setup and AdjustmentsMaintenance Specifications Trouble ShootingSafety Training PreparationOperation Transportation Equipment Setup and Adjustments Adjustments Park Brake Cutting HeightMower Deck Leveling Adjustments Mule Drive Belt Tension Reverse Spring Detent AdjustmentThrottle Lever Tension Adjustments Adjustments Motion Control Linkage Adjustment Operating Instructions ControlsOperating Instructions Starting and Operation Maintenance Maintenance Specifications Peak TorqueProblem Possible Causes Wiring Diagram Service Record Page

ZKH61252, ZKH52222, ZKH52252 specifications

The Yazoo/Kees ZKH61252, ZKH52222, and ZKH52252 are advanced, high-performance machines designed for landscaping, grass care, and other turf management tasks. These models embody the combination of durability, efficiency, and user-friendliness that the Yazoo/Kees brand is renowned for.

One of the standout features across these models is their powerful engines, which provide reliable performance and robust torque. Powered by industry-leading engines, the ZKH series ensures that operators can tackle even the most challenging terrains with ease. The ZKH61252, with its higher horsepower, is particularly suited for large commercial properties and demanding landscaping projects, while the ZKH52222 and ZKH52252 are perfect for residential lawns and smaller tasks without sacrificing power or efficiency.

The innovative cutting deck design is another hallmark of the ZKH series. These mowers feature advanced mulching technology, which finely chops grass clippings and redistributes them evenly back onto the lawn. This not only enhances the aesthetics of the lawn but also supports healthy growth by returning nutrients to the soil. The cutting height adjustment system is precise and user-friendly, allowing operators to achieve the perfect cut for various grass types and conditions.

Ergonomics and operator comfort have not been overlooked in the ZKH series. The models feature plush, contoured seats that reduce fatigue during extended mowing sessions. The intuitive control layout ensures that operators can easily fine-tune settings without having to divert their attention from the task at hand. Additionally, the ZKH series incorporates vibration-dampening technology, which further enhances ride comfort, making it easier for operators to navigate rough terrains.

In terms of technology, the ZKH61252, ZKH52222, and ZKH52252 integrate advanced features such as zero-turn capabilities, allowing for exceptional maneuverability around obstacles, flower beds, or trees. This increases productivity and reduces mowing time, making these machines invaluable for both professional landscapers and homeowners.

Durability is also a key characteristic of the Yazoo/Kees ZKH series. With a robust frame construction and high-quality materials, these mowers are built to withstand the rigors of regular use. The maintenance-friendly design ensures that routine servicing can be accomplished quickly and easily, maximizing uptime.

In summary, the Yazoo/Kees ZKH61252, ZKH52222, and ZKH52252 represent a blend of power, efficiency, comfort, and advanced technology. Suitable for both commercial and residential applications, these machines deliver exceptional performance and a premium mowing experience, making them an excellent choice for any landscaping enthusiast.
Top Page Image Contents