TROUBLE SHOOTING
PROBLEM | POSSIBLE CAUSES |
Blade switch on.
Drive levers not in the neutral slots. Operator not in seat.
ENGINE WILL NOT START.Park brake disengaged. Dead battery.
Fuel valve closed or in the wrong position. No fuel.
Spark plugs defective. Spark plug wires off.
MACHINE WILL NOT MOVE OR MOVES SLOWLY OR HARD.
Park brake on.
Pump bypass valves open. Pump drive belt loose or off. Hydraulic system failure. Air in the hydraulic system.
Blade belt off.
BLADES WILL NOT ENGAGE.Clutch unhooked form wiring harness.
Blade switch failure or unhooked from harness. Fuse burnt out.
Tire pressure uneven. Blades bent.
UNEVEN CUTDeck chains uneven. Deck lift blocks loose.
Blades dull.
CUT IS RAGGEDGround speed to fast. Grass to long.
Grass accumulation under deck.
Blades loose.
MACHINE VIBRATIONBlades unbalanced. Engine loose from mounts.
26