Yazoo/Kees ZMKW48171 manual Adjustments, Control Arms, Seat Install, Engine Oil, Cutting Height

Page 16

SETUP AND ADJUSTMENTS

Control Arms

Remove top bolt in control arm and loosen bot- tom bolt, rotate the control levers to the upright position. Align the levers so they are even in the neutral position. Reinstall hardware and tighten. FIG - 1

Seat Install

1.Remove seat assembly from the crate.

2.Remove the four 5/16C nyloc nuts or 5/16C studed knobs from the bottom of the seat. Retain for use later.

3.Align the seat bottom with the holes in the seat frame. Place seat on top of the seat frame and secure with the four nuts or knobs re- moved in step 2.

4.Connect the wire harness from the seat to the frame harness.

Engine Oil

Check engine oil with dip stick. Add if needed per the engine manufactures specifications. See en- gine manual for oil type and filling specifications. FIG - 2

Loosen the discharge chute slightly and lower into position. Chute should be snug but still pivot freely.

Control

Motion

Arm

Control

 

Lever

FIG - 1

“F” Full

Operating Mark

Range

FIG - 2

Lift Lever

Adjustments

 

Cutting Height

 

Stop the mower and disengage the blades.

Deck Height

 

Raise the deck height lever to the transport posi-

Adjusment Plates

tion.

 

Remove the height adjustment pin and place it in

 

the desired cutting height hole. Lower the lift lever

 

down onto pin. NOTE: Anti-scalp rollers must be

 

in the proper position for maximum deck floata-

 

tion. See the decal on the front deck for proper

 

settings. FIG - 3

 

FIG - 3

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents ZMKW48171 ZMKW48192ZMKW52212 ZMKH52232Page Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesPresentation PresentationRops Assembly Roll Over Protection System Setup and AdjustmentsTires Adjustments Seat InstallControl Arms Engine OilMower Deck Leveling Throttle Lever TensionPark Brake Adjustment Motion Control Linkage AdjustmentOperation Operating instructionsKey Switch Hour MeterFuel Shut Off Pump ReleaseMaintenance Safety interlock systemCutter Housings Mower bladesHardware Air filterHydraulic system Deck beltPump belt LubricationTire pressure Fuel filterTorque Specifications Maintenance Schedule Trouble Shooting ProblemPage Wiring Diagrams Wiring Diagrams

ZMKW48171, ZMKW48192, ZMKW52212, ZMKH52232, ZMKH61251, ZMKW48171 specifications

Yazoo/Kees has been a renowned name in the lawn care and landscaping industry, producing high-quality equipment that delivers superior performance and reliability. Among their extensive range of products, the ZMKW48171, ZMKW48192, ZMKW52212, ZMKH52232, and ZMKH61251 models stand out for their exceptional features and cutting-edge technologies.

The ZMKW48171 is a robust zero-turn mower designed for both residential and commercial users. Its powerful engine provides remarkable torque, ensuring efficient cutting even in tough conditions. The mower is equipped with an ergonomic seat, allowing extended use without discomfort. Its user-friendly controls and quick maneuverability make it perfect for tackling intricate landscaping jobs.

The ZMKW48192 is an upgraded version that includes a wider cutting deck, enhancing productivity and reducing mowing time. This model features advanced suspension technology, which provides a smoother ride over uneven terrain. Its precision steering capability allows operators to navigate around obstacles effortlessly, ensuring a flawless cut every time.

Next in line, the ZMKW52212 offers advanced cutting technology that allows for variable cutting heights. This feature enables users to adapt to different grass types and conditions, promoting optimal lawn health. It includes a heavy-duty frame designed to withstand the rigors of professional usage, while its efficient fuel consumption system helps in reducing operational costs.

The ZMKH52232 model takes things a step further with its hybrid technology. This mower combines gas power with electric assist, delivering a quieter operation and lower emissions. The ZMKH52232 also features a smart control panel with digital displays that provide real-time information about battery life, fuel consumption, and maintenance intervals.

Lastly, the ZMKH61251 model is the flagship unit, renowned for its unmatched performance. It boasts a high-capacity motor paired with a reinforced cutting deck, capable of handling the toughest mowing tasks. The innovative touchscreen interface allows for effortless navigation through settings, enabling personalized preferences for different users.

In summary, Yazoo/Kees models ZMKW48171, ZMKW48192, ZMKW52212, ZMKH52232, and ZMKH61251 exemplify the best in landscaping technology. Each model comes packed with features that enhance comfort, efficiency, and productivity, making them ideal choices for both residential and commercial applications. With their commitment to quality and innovation, Yazoo/Kees continues to pave the way for advanced lawn care solutions.
Top Page Image Contents