Hardware Installation

This chapter describes how to install the CardBus 10/100M dual-speed PC Card in your notebook computer and connect it to network. It’s referred to “the PC Card” in this manual.

The PC Card could connect to either 100Mbps Fast Ethernet or 10Mbps Ethernet over unshielded twisted pair (UTP) calbe. The PC Card has the ability of automatic sensing and operating on either speed without manual recofiguration.

After finishing the installation of PC Card into your Notebook, please refer to Software Installation on how to install network drivers using menu driven installation utility.

Inserting the CardBus Dual-Speed PC Card

1.Hold the CardBus PC Card with wide connector

toward the slot and the brand lable facing upward.

2.Insert the CardBus PC Card and push it firmly into the bottom. ( Please see the figuer on the next page for reference)

- 1 -

Page 2
Image 2
Abocom FE2000 manual Hardware Installation, Inserting the CardBus Dual-Speed PC Card