11Office mode, 12Choosing speakerphone placement, English

English

11Office mode

Office mode creates the appropriate sound sensitivity to provide optimal performance of the Jabra SP500 in the office or home environment. It's recommended that you only use this mode in mentioned enviroment.

By pressing and holding the mute button for 5 seconds you will see the blue LED flash rapidly and hear a short beep

To return to normal mode, repeat the above action

When Jabra SP500 is in office standby mode, blue LED flashes twice every 3 seconds.

For optimal performance during teleconferences, please ensure all participants face the microphone

12Choosing speakerphone placement

For optimal performance, place your Jabra SP500 in direct line of sight with your Bluetooth mobile phone. You will get better performance when there are no obstructions (including parts of your body ) between the Jabra SP500 and your mobile phone. Ensure that the microphone is pointing towards your mouth for optimal sound clarity.

The Jabra SP500 comes with two mounting options for your vehicle.

•A clip for attaching to the sun visor (See fig. 3) and suction mount for use on the windscreen. (See fig. 4)

To release the clip or suction mount – just pull the clip or suction mount outwards. (See fig. 3.3 and 4.3)

IMPORTANT: Ensure that the speakerphone does not obstruct your view of the road or other road users. It is the owner’s responsibility to ensure that the Jabra SP500 does not create a safety hazard and that its positioning complies with E.U., country, and/or local laws. The Jabra SP500 should also be positioned such that it does not interfere with any vehicle safety equipment, including air bags. The Jabra SP500 should be positioned securely. Please be aware that in the event of a crash, loose objects may contribute to driver injury by becoming projectiles.

13Replacing the batteries

The Jabra SP500 comes complete with two 1.2-volt (AA) rechargeable batteries. You may have to eventually replace the batteries. Please use standard rechargeable 1.2 volt (AA 2000 mAh) NiMh batteries.

1.Remove the back cover from the speakerphone and replace both batteries as indicated. Re-attach the back cover to the speakerphone. (See fig. 5)

14	Enhanced features (for Bluetooth mobile phones
	with hands-free profile)

Bluetooth profiles⁴ are protocols through which Bluetooth devices communicate with each other. Bluetooth phones support different sets of profiles – most support both headset and hands-free profile. In order for Bluetooth devices to talk to each other they need to support the same Bluetooth profile. Jabra SP500 supports both the headset and hands-free profiles.

Although the Jabra SP500 is compatible with Bluetooth phones with either Bluetooth profile, enhanced features are available for phones that support the hands-free Bluetooth profile. Check your phone’s instruction guide or contact the phone manufacturer to find out if your phone supports the hands-free Bluetooth profile.

Enhanced features:

•Last number redial (when not on a call)

While the speakerphone is on, press and hold until you hear 2 short beeps, release immediately.

•Rejecting an incoming call (when not on a call)

When your phone rings, press and hold until you hear 2 short beeps, release immediately.

•Call-waiting(swapping between 2 calls)

When your phone notifies you of another incoming call while you’re on a call, press

and hold until you hear 2 short beeps, release immediately.

•Putting a call on hold

While you’re on a call, press and hold until you hear 2 short beeps, release immediately. Repeat to retrieve the call.