Jabra SP 500 user manual Thank you, Drive safely, Remember, driving comes first, not the call

English

Thank you

Thank you for purchasing a Jabra SP500 the most versatile Bluetooth speakerphone on the market. Jabra has become the market leader in hands-free communication products through the innovation and performance of our products. The Jabra SP500 is designed to perform superbly in any location – in the car, the home or the office.

!Drive safely

Several studies have shown that cell phone usage while driving creates a distraction to the driver which may increase the likelihood of an accident. This distraction potential is not eliminated by the use of a hands-free phone. Hands-free phones have not been shown to be safer than hand-held phones with respect to driver distraction. When using the phone while driving, keep conversations short and resist any temptation to make notes or read documents. Before answering calls consider your circumstances. Pull off the road and park before making or answering calls when driving conditions require (e.g. bad weather, high traffic density, presence of children in the car, difficult junctions or manoeuvres.)

Remember, driving comes first, not the call!

Abide by local laws.

Please check if the local laws where you live restrict the use of mobile phones while driving. It is the owner’s responsibility to use this product in compliance with the laws of the place where you live.

Jabra SP500 Overview

1 Multi-function Button

2Indicator Light (Blue/Yellow/Red)

3Volume Control

4 Mute Button

5 Microphone Boom

6 Pairing button

7 Charging Socket

8 Speaker

BEFORE USING YOUR SPEAKERPHONE

1Check for phone compatibility

The Jabra SP500 is compatible with most Bluetooth¹ (see Glossary) mobile phones. You can check whether your phone has Bluetooth capability by visiting your phone manufacturer’s web site or Jabra’s web site (http://www.Jabra.com/JabraCMS/NA/EN/MainMenu/Products/ ProductFinder.htm) which has complete information on compatibility.

2Charge the batteries

The Jabra SP500 comes complete with two 1.2-volt (AA 2000 mAh) rechargeable batteries that must be fully charged before you use the speakerphone for the first time.

1.Important: Remove the battery protection plastic sheet to activate the batteries.

(See fig. 1. )

2.Plug the adaptor jack into the speakerphone and the AC adaptor or the vehicle power charger into a power socket. (See fig. 1. )

3.The red light will turn on when charging begins. After approximately 2 hours the red light will go out indicating that the Jabra SP500 is fully charged.

4.Unplug the AC adaptor or the vehicle power charger lead from the speakerphone.

5.You are now ready to “pair” the Jabra SP500 with your mobile phone. (See Section 4)

WARNING: Using another AC adaptor other than the one provided may damage or destroy the speakerphone. We recommend that you use the rechargeable batteries supplied but you can use other brands. You can not use non rechargeable batteries

in your Jabra SP500.

3Switching on the Jabra SP500

Switch on the Jabra SP500

1.Press and hold the multifunction button until you hear the start up melody and the blue LED flashes three times. When the Speakerphone is in standby mode, the Blue LED flashes every three seconds.

Please note that the Blue light will be automatically switched off after 1 min in order to save power and to not distract when driving at night. The light will be re-activated upon any key press.

Switch off the Jabra SP500

1.Press and hold the multifunction button for approximately 5 seconds until you hear the shut down melody and the LED has been switched off completely.

English

2 3