Yard Machines 509 manual

Page 5

Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly.

After striking a foreign object, stop the engine, remove the wire from the spark plug, and thoroughly inspect the mower for any damage. Repair the damage before starting and operating the mower.

Never attempt to make a wheel or cutting height adjustment while the engine is running.

Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and replace with manufacturer’s recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Do not change the engine governor setting or overspeed the engine. Excessive engine speeds are dangerous.

WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

NOTE: Not all safety labels shown may apply to your lawn mower.

5

Image 5
Contents OPERATOR’S Manual Table of Contents General Operation Maintaining SafetySlope Operation Page Slope Gauge Contents of Hardware Pack Setting Up Your Lawn Mower Disconnecting Spark Plug WireAssembling Your Lawn Mower Removing Unit From CartonAttaching Starter Rope Installing Front WheelsInstalling Rear Wheels and Axle Shaft Removing Chute Retainer Installing Mulching BaffleAttaching Struts If Equipped Stopping Engine Know Your Lawn MowerOperating Your Lawn Mower Using Your Lawn MowerGas and Oil Fill-Up Starting EngineCutting Height Adjustment Making AdjustmentsHandle Height Adjustment Engine AdjustmentsLubrication Maintaining Your Lawn MowerGeneral Recommendations Deck MaintenanceEngine Storing Your Lawn Mower Problem Cause Remedy TroubleshootingModels Part Description MANUFACTURER’S Limited Warranty for