Yard-Man 24A-060F401 manual Operation, Maintenance and Storage

Page 4

i.Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.)

j.To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

k.Allow machine to cool at least 5 minutes before storing.

OPERATION

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect the spark plug wire, ground it against the engine and perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

5.Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

6.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

7.Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

8.Never operate without vacuum bag and discharge chute properly attached to the machine. Never empty or change vacuum bag while the engine is running. Zippered end of vacuum bag must be kept closed at all times during operation.

9.Never operate without either the inlet nozzle or optional hose attachment properly attached to the machine. Never attempt to attach or change either attachment while the engine is running.

10.Keep all guards, deflectors and safety devices in place and operating properly.

11.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

12.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

13.Do not operate this machine on a gravel surface.

14.Do not operate this machine while under the influence of alcohol or drugs.

15.Muffler and engine become hot and can cause a burn. Do not touch.

16.Never pick up or carry machine while the engine is running.

MAINTENANCE AND STORAGE

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

4

Image 4
Contents OPERATOR’S Manual Table of Contents Finding Model NumberEngine Information Calling Customer SupportTraining Important Safe Operation PracticesPreparation Maintenance and Storage OperationDisconnecting Spark Plug Wire Assembling Your Yard VacuumRemoving Unit From Carton Loose Parts In Carton See FigureAttaching The Handle Attaching The Hose AssemblyAttaching The Bag Know Your Yard Vacuum Starter HandleBag Bag HandleOperating Your Yard Vacuum Stopping EngineGas And Oil Fill-Up Starting EngineUsing the Hose Assembly Using the Nozzle VacuumTo Remove Blower Chute Customer Responsibilities Nozzle Height AdjustmentLubrication Removing The Flail Screen MaintenanceEngine Storing Your Yard Vacuum Troubleshooting Problem Cause RemedyModel 24A-060F401 Part Description Model 24A-060F401 Impeller Assembly 781-0735 Pin Clip 719-0329 Page Búsqueda DEL Número DE Modelo ÍndiceServicio Telefónico DE Asistencia AL Cliente Capacitación Sección 1 Medidas Importantes DE SeguridadPreparación Funcionamiento Mantenimiento Y AlmacenamientoSección 2 Montaje DE LA Aspiradora Para Patios Extracción de la unidad de la cajaPiezas sueltas en la caja Ver Figura Desconexión del cable de la bujíaMontaje de la manija Colocación de la bolsaBolsa Manija del arrancadorManija de la bolsa Detención del motor Carga de gas y aceiteEncendido del motor Descarga de la bolsaUso del pico de la aspiradora Extracción del canal de sopladoUso del montaje de la manguera Ajuste de la altura del pico Responsabilidades del clienteLubricación MantenimientoAfilado o recambio de las hojas de la cortadora Patios Sección 6 Guía Para LA Solución DE Problemas Problema Causa SoluciónGarantía Limitada DEL Fabricante Para MANUFACTURER’S Limited Warranty for

24A-060F401 specifications

The Yard-Man 24A-060F401 is a robust and versatile lawn tractor designed to deliver exceptional performance for homeowners looking to maintain their lawns with ease. One of the standout features of this model is its powerful engine. Equipped with a reliable and efficient Briggs & Stratton engine, the Yard-Man 24A-060F401 provides ample power to tackle even the toughest mowing tasks. The engine design emphasizes reliability while also ensuring optimal fuel consumption, making it an excellent choice for eco-conscious consumers.

With a cutting deck measuring 42 inches, this lawn tractor offers a wide cutting path that reduces mowing time significantly compared to smaller models. The steel deck construction enhances durability and ensures that it withstands the rigors of regular use. Users can choose from multiple cutting heights, with an easy-to-use lever for adjustment, enabling precision mowing for different grass types and conditions.

Another important characteristic of the Yard-Man 24A-060F401 is its hydrostatic transmission system, which allows for smooth and effortless speed control. This feature is particularly advantageous for maneuvering around obstacles such as trees and garden beds, giving the operator complete control over the mowing experience. The tractor is designed to provide a comfortable ride, featuring an adjustable seat that accommodates users of varying heights.

The Yard-Man 24A-060F401 also integrates advanced technologies to enhance user experience. For instance, its ergonomic steering wheel makes navigation simple, while the integrated cup holder adds convenience for longer mowing sessions. The tractor is designed with easy access to essential controls, promoting a user-friendly interface that both novices and experienced users can appreciate.

For added versatility, the Yard-Man 24A-060F401 is compatible with various attachments, including mulch kits and baggers, which can further enhance mowing efficiency and lawn care options. The tractor's sturdy construction and premium features make it a solid investment for anyone looking to achieve pristine lawn aesthetics with minimal effort. In summary, the Yard-Man 24A-060F401 stands out for its power, user-friendly design, and adaptability, delivering reliability and performance that homeowners can trust.