Yard-Man 24A-060F401 manual Important Safe Operation Practices, Training, Preparation

Page 3

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.

WARNING: Engine Exhaust, some of its constituents, and certain vehicle

components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

TRAINING

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 16 years old to operate this machine. Children 16 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Keep bystanders, helpers, pets, and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

7.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

8.Never attempt to unclog either the feed intake or discharge opening, remove or empty vacuum bag, or inspect and repair the machine while the engine is running. Shut the engine off and wait until all moving parts have come to a complete stop. Disconnect the spark plug wire and ground it against the engine.

PREPARATION

1.Thoroughly inspect the area where the equipment is to be used. Remove all rocks, bottles, cans, or other foreign objects which could be picked up or thrown and cause personal injury or damage to the machine.

2.Always wear safety glasses or safety goggles during operation or while performing an adjustment or repair, to protect eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Wear sturdy, rough-soled work shoes and close- fitting slacks and shirts. Loose fitting clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals. Wear leather work gloves when feeding material in the chipper chute.

4.Before starting, check all bolts and screws for proper tightness to be sure the machine is in safe working condition. Also, visually inspect machine for any damage at frequent intervals.

5.Maintain or replace safety and instructions labels, as necessary.

6.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

3

Image 3
Contents OPERATOR’S Manual Calling Customer Support Table of ContentsFinding Model Number Engine InformationImportant Safe Operation Practices TrainingPreparation Operation Maintenance and StorageLoose Parts In Carton See Figure Disconnecting Spark Plug WireAssembling Your Yard Vacuum Removing Unit From CartonAttaching The Hose Assembly Attaching The HandleAttaching The Bag Bag Handle Know Your Yard VacuumStarter Handle BagStarting Engine Operating Your Yard VacuumStopping Engine Gas And Oil Fill-UpUsing the Nozzle Vacuum Using the Hose AssemblyTo Remove Blower Chute Nozzle Height Adjustment Customer ResponsibilitiesLubrication Maintenance Removing The Flail ScreenEngine Storing Your Yard Vacuum Problem Cause Remedy TroubleshootingModel 24A-060F401 Part Description Model 24A-060F401 Impeller Assembly 781-0735 Pin Clip 719-0329 Page Índice Búsqueda DEL Número DE ModeloServicio Telefónico DE Asistencia AL Cliente Sección 1 Medidas Importantes DE Seguridad CapacitaciónPreparación Mantenimiento Y Almacenamiento FuncionamientoDesconexión del cable de la bujía Sección 2 Montaje DE LA Aspiradora Para PatiosExtracción de la unidad de la caja Piezas sueltas en la caja Ver FiguraColocación de la bolsa Montaje de la manijaManija del arrancador BolsaManija de la bolsa Descarga de la bolsa Detención del motorCarga de gas y aceite Encendido del motorExtracción del canal de soplado Uso del pico de la aspiradoraUso del montaje de la manguera Mantenimiento Ajuste de la altura del picoResponsabilidades del cliente LubricaciónAfilado o recambio de las hojas de la cortadora Patios Problema Causa Solución Sección 6 Guía Para LA Solución DE ProblemasGarantía Limitada DEL Fabricante Para MANUFACTURER’S Limited Warranty for

24A-060F401 specifications

The Yard-Man 24A-060F401 is a robust and versatile lawn tractor designed to deliver exceptional performance for homeowners looking to maintain their lawns with ease. One of the standout features of this model is its powerful engine. Equipped with a reliable and efficient Briggs & Stratton engine, the Yard-Man 24A-060F401 provides ample power to tackle even the toughest mowing tasks. The engine design emphasizes reliability while also ensuring optimal fuel consumption, making it an excellent choice for eco-conscious consumers.

With a cutting deck measuring 42 inches, this lawn tractor offers a wide cutting path that reduces mowing time significantly compared to smaller models. The steel deck construction enhances durability and ensures that it withstands the rigors of regular use. Users can choose from multiple cutting heights, with an easy-to-use lever for adjustment, enabling precision mowing for different grass types and conditions.

Another important characteristic of the Yard-Man 24A-060F401 is its hydrostatic transmission system, which allows for smooth and effortless speed control. This feature is particularly advantageous for maneuvering around obstacles such as trees and garden beds, giving the operator complete control over the mowing experience. The tractor is designed to provide a comfortable ride, featuring an adjustable seat that accommodates users of varying heights.

The Yard-Man 24A-060F401 also integrates advanced technologies to enhance user experience. For instance, its ergonomic steering wheel makes navigation simple, while the integrated cup holder adds convenience for longer mowing sessions. The tractor is designed with easy access to essential controls, promoting a user-friendly interface that both novices and experienced users can appreciate.

For added versatility, the Yard-Man 24A-060F401 is compatible with various attachments, including mulch kits and baggers, which can further enhance mowing efficiency and lawn care options. The tractor's sturdy construction and premium features make it a solid investment for anyone looking to achieve pristine lawn aesthetics with minimal effort. In summary, the Yard-Man 24A-060F401 stands out for its power, user-friendly design, and adaptability, delivering reliability and performance that homeowners can trust.