Yard-Man 247.37979 manual Inner Hole Hairpin Clip Pinch Here

Page 9

Step 5. Pinch lower handle against mounting bracket with pliers.

Step 6. Move hairpin clip from outer to inner hole on left and right handle mounting brackets.

Inner Hole

Hairpin Clip

Pinch Here

Step 7. Attach control cables to handle with pull ties found on the handle.

HERE

Step 8. Squeeze the blade control handle against the upper handle and pull out the starter rope slowly.

Step 9. Thread the starter rope into the rope guide.

SQUEEZE

Blade Control Handle

Upper Handle

Rope Guide

Starter Rope

Look Here

9

Image 9

Contents MTD Products INC. P.O. BOX 368022 CLEVELAND, Ohio Important Read Safety Rules and Instructions CarefullyCalling Customer Support Finding Your Model NumberCopy the serial number here 4683Slope Gauge General Operation Important Safe Operation PracticesSlope Operation ServiceDo not ChildrenRNI Disconnect Spark Plug Wire Unpacking InstructionsRemove Unit from Carton Items Required for Assembly SET UP Your Lawn MowerSET-UP Instructions Inner Hole Hairpin Clip Pinch Here Controls Operation Cutting Height Adjustment LeverEngine Controls GAS and OIL FILL-UPUsing Your Rotary Mower Neutral Adjustment TestTo Start Engine and Engage Blade To Stop Engine and BladeBagging Grass Clippings SIDE-DISCHARGE Grass Clippings Emptying Your Grass BAGHandle Height Adjustment AdjustmentsDrive Clutch Control Adjustment Bottom ViewPush Shift Lever Cable AdjustmentCutting Blade REMOVAL, Replacement and Sharpening MaintenanceEngine DeckPage Pivot baffle towards the rear of the mower Drive Belt Removal and ReplacementSemble the lower pulley assembly Important When replacing the belt, do not disasSix-Speed BeltSee Engine Manual LubricationOFF-SEASON Storage Trouble Possible Causes Corrective Action Trouble Shooting GuideModel Model Model Labels Model Model Page Other Warranties MANUFACTURER’S Limited Warranty for