Yard-Man 133Q694G401 Chokecontrol, Light Switch, Ammeter, Hydrostaticcontrol Lever, Parking Brake

Page 7

CHOKECONTROL

The choke control is located on the right side of the dashboard and is operated manually. Details for the choke operation are covered in the separate engine manual packed with your unit. See figure 9.

LIGHT SWITCH

The head lamps are operated by pushing the light switch located on the dashboard. The head lamps will only operate when the engine is running. See figure 9.

AMMETER

The ammeter registers the rate of battery charge or discharge. The ammeter will register on the discharg- ing side with starting the engine. It should register on the opposite side (charging) when the engine is run- ning in the fast position until the battery is completely charged. With a fully charged battery or with the engine idling, the ammeter will not show a charge. See figure 9.

HYDROSTATICCONTROL LEVER

The hydrostatic control lever is located on top of the fender on the left side of the tractor. This single con- trol lever, connected to the hydrostatic transmission, controls both the speed and direction of the tractor. Infinite speed control is achieved by moving the con- trol lever forward or backward. The farther forward or backward you move the control lever, the faster you will travel. Pulling the control lever into neutral (N) area will stop the tractor. See figure 10.

Hydrostatic

Control

Lever

PARKING BRAKE

To set the parking brake, depress the clutch-brake pedal, pull up the parking brake knob and release the clutch-brake pedal. It will stay in the raised position. To release the parking brake, depress and release the clutch-brake pedal. See figure 11.

NOTE: The parking brake must be set if the operator leaves the seat with the engine running.

FIGURE 11.

RELIEF VALVE

A hydrostatic relief valve is provided so the unit can be moved without the engine running. The lever which operates the relief valve is located on the console. See figure 11.

To operate the relief valve, place the hydrostatic con- trol lever in neutral, release the parking brake, push the lever forward and to the right to lock. Be certain to release the lever by pushing it to the left before oper- ating the engine.

FIGURE 10.

CLUTCH-BRAKEPEDAL

The clutch-brake pedal is located on the left side of the tractor. See figure 9. Depressing the pedal returns the drive unit to neutral (N) and applies the brake.

NOTE: The clutch-brakepedal must be depressed to start the engine.

INDICATORLIGHTS

Three indicator lights are located in the dash panel. If a light illuminates when attempting to start the unit, proceed as follows.

CLUTCH--Depress the clutch pedal.

PTO--Place lift lever in the DISENGAGED position. OIL--Check the crankcase oil level, and add oil as required.

CUTTING CONTROLS

A. LIFT LEVER

The lift lever is used to raise and lower the cutting deck and to engage and disengage the blades.

Pulling it all the way back and locking it disengages the blades.

NOTE: The lift lever must be in the disengaged posi- tion when starting the engine, when shifting into

reverse and if the operator leaves the seat. See figure 12.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents YaRD-MaN Generaloperation II. Slopeoperation Important SafeoperationpracticesUnpacking BatteryinformationChargethe Battery Activatingthe BatteryAny circumstances is 30 p.s.i. Equal tire Attachingthe Steering WheelAttachingthe Chute Deflector Tire PressureThrottle Control Ignition SwitchHydrostaticcontrol Lever Light SwitchChokecontrol AmmeterGAS and OIL FILL-UP Deck Lift IndicatorSetting the Cutting Height OperationAdjustments Spring Flat Washer Hairpin Clip DecklevelingadjustmentCutting Deckengagementadjustment CarburetoradjustmentsLubrication MaintenanceCheck Fluid Level Wheel AdjustmentBatterycareand Maintenance Cutting BladesTires Beltremoval and ReplacementP. Ohvi OFF-SEASON Storage Problem Possible Causes Trouble Shooting GuideOr a Fence Post Sight Hold this Level with a Vertical Tree Power PoleI1.1 Corner of a BuildingManufacturers Limited Warranty

133Q694G401 specifications

The Yard-Man 133Q694G401 is a versatile and efficient lawn mower designed to meet the needs of homeowners seeking a reliable solution for maintaining their lawns. This model stands out in the Yard-Man lineup due to its powerful engine and user-friendly features, making it an excellent option for both novice and experienced users.

At the heart of the Yard-Man 133Q694G401 is its robust engine, typically a 4-stroke powertrain that delivers significant torque and ensures optimal cutting performance. This engine not only enhances efficiency but also promotes fuel savings, allowing users to mow their lawns without frequent refueling stops. The mower's cutting deck is designed to be durable, with a width that accommodates a variety of lawn sizes, making it suitable for both small and medium yards.

One of the key features of the Yard-Man 133Q694G401 is its adjustable cutting height. This allows users to customize the mower’s performance according to the type of grass and the desired cut. With several height settings available, it promotes a healthy lawn by enabling proper grass length management, which is essential for preventing scalping and promoting robust growth.

In terms of ease of use, the Yard-Man 133Q694G401 incorporates an ergonomic handle, designed for comfort and to reduce fatigue during longer mowing sessions. Its lightweight construction ensures that maneuverability is not compromised, allowing users to easily navigate around obstacles like trees and flower beds. Additionally, some models are equipped with features such as self-propulsion, providing extra assistance in tackling larger areas and hilly terrains with minimal effort.

The mower’s bagging system is another noteworthy characteristic, designed for efficient collection of grass clippings. This feature not only keeps the lawn tidy but also facilitates easy disposal or composting of yard waste, contributing to environmentally friendly practices. A mulching option is often available as well, allowing users to recycle clippings back into the lawn, enhancing soil fertility.

Moreover, the Yard-Man 133Q694G401 often comes with maintenance-friendly features, like easy-access air filters and straightforward oil changes, simplifying upkeep and prolonging the mower’s lifespan.

Overall, the Yard-Man 133Q694G401 stands out as a sturdy, efficient, and user-centric lawn mower that caters to the diverse needs of homeowners. With its combination of power, versatility, and convenience, it presents an excellent choice for anyone looking to maintain a pristine lawn with ease.
Top Page Image Contents