Operation, GAS and OIL FILL-UP | Yard-Man 133Q694G401 specs

B. DECK LIFT INDICATOR

Lever

The deck lift indicator marks the position being used for the lift lever. Select the lift lever position desired, press the indicator lever outward, move it to the posi- tion immediately below the lift lever and release the indicator lever. See figure 12.

C. SETTING THE CUTTING HEIGHT

1.Select the position for the lift lever which gives the desired cutting height. Move the deck lift indi- cator so that the lift lever can be returned to the same position after it is raised.

2. Move the deck wheels to the hole location so the	/,
2. Move the deck wheels to the hole location so the
wheels are 1/4 to 1/2 inch above the ground.	FIGURE 12.

Lift Indicator

OPERATION

WARNING

AVOID SERIOUS INJURY OR DEATH

GO UP AND DOWN SLOPES,NOT ACROSS.• AVOID SUDDENTURNS. DO NOT OPERATETHE UNIT WHERE IT COULDSLIP OR TIP.

IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK DOWNHILL SLOWLY.

DO NOT MOW WHEN CHILDRENOR OTHERSAREAROUND. NEVERCARRY CHILDREN.

LOOK DOWNAND BEHINDBEFOREAND WHILE BACKING.

KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) IN PLACEAND WORKING. REMOVEOBJECTSTHATCOULDBETHROWN BYTHE BLADE(S). KNOW LOCATIONAND FUNCTIONOFALL CONTROLS.

BE SURE BLADE(S) AND ENGINE ARE STOPPEDBEFORE PLACING HANDSOR FEETNEARBLADE(S).

BEFORELEAVING OPERATOR'SPOSITION, DISENGAGE BLADE(S), PLACETHE SHIFT LEVER IN NEUTRAL, ENGAGEBRAKE LOCK, SHUT ENGINEOFFAND REMOVEKEY.

READ OPERATOR'SMANUAL

GAS AND OIL FILL-UP

Check the oil level and add if necessary. Service the engine with gasoline as instructed in the sepa- rate engine manual packed with your tractor.

Read instructions carefully.

IMPORTANT: Your tractor is shipped with oil; how-

ever you must check the oil level before operating. Be careful not to overfill.

with engine running or while engine is WARNING: Never fill fuel tank indoors, hot.

STARTING THE ENGINE

IMPORTANT: This unit is equipped with a safety interlock system for your protection. The purpose of the safety interlock system is to prevent the engine from cranking or starting unless the clutch-brake pedal is depressed and the lift lever is in the disen- gaged position. In addition, the lift lever must be in the disengaged position when the unit is put into reverse or the engine will shut off. If the operator leaves the seat with the lift lever engaged and/or without setting the parking brake, the engine will shut off.

WARNING: Do not operate the tractor if the interlock system is malfunctioning because it is a safety device, designed for protection.

1.Place the lift lever in the DISENGAGED position.

2.Depress the clutch-brake pedal and set the park- ing brake.

3.Place the hydrostatic control lever in the NEU- TRAL (N) position.

4.Set the throttle control in the FAST position.

5.Pull out the choke control (a warm engine may not require choking).

6.Turn the ignition key to the right to the START position. After the engine starts, release the key. It will return to the ON position.

NOTE: Protect the starter life by using short starting cycles of several seconds. Cranking more than 15 seconds per minute can damage the starter motor.

7.Push choke knob in gradually. Move the throttle control to desired engine speed.

133Q694G401 specifications

The Yard-Man 133Q694G401 is a versatile and efficient lawn mower designed to meet the needs of homeowners seeking a reliable solution for maintaining their lawns. This model stands out in the Yard-Man lineup due to its powerful engine and user-friendly features, making it an excellent option for both novice and experienced users.

At the heart of the Yard-Man 133Q694G401 is its robust engine, typically a 4-stroke powertrain that delivers significant torque and ensures optimal cutting performance. This engine not only enhances efficiency but also promotes fuel savings, allowing users to mow their lawns without frequent refueling stops. The mower's cutting deck is designed to be durable, with a width that accommodates a variety of lawn sizes, making it suitable for both small and medium yards.

One of the key features of the Yard-Man 133Q694G401 is its adjustable cutting height. This allows users to customize the mower’s performance according to the type of grass and the desired cut. With several height settings available, it promotes a healthy lawn by enabling proper grass length management, which is essential for preventing scalping and promoting robust growth.

In terms of ease of use, the Yard-Man 133Q694G401 incorporates an ergonomic handle, designed for comfort and to reduce fatigue during longer mowing sessions. Its lightweight construction ensures that maneuverability is not compromised, allowing users to easily navigate around obstacles like trees and flower beds. Additionally, some models are equipped with features such as self-propulsion, providing extra assistance in tackling larger areas and hilly terrains with minimal effort.

The mower’s bagging system is another noteworthy characteristic, designed for efficient collection of grass clippings. This feature not only keeps the lawn tidy but also facilitates easy disposal or composting of yard waste, contributing to environmentally friendly practices. A mulching option is often available as well, allowing users to recycle clippings back into the lawn, enhancing soil fertility.

Moreover, the Yard-Man 133Q694G401 often comes with maintenance-friendly features, like easy-access air filters and straightforward oil changes, simplifying upkeep and prolonging the mower’s lifespan.

Overall, the Yard-Man 133Q694G401 stands out as a sturdy, efficient, and user-centric lawn mower that caters to the diverse needs of homeowners. With its combination of power, versatility, and convenience, it presents an excellent choice for anyone looking to maintain a pristine lawn with ease.